What it means
Maytag lists the user interface (touchpad) or the wiring for F60 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag cooktop F60 / User interface
Maytag lists the user interface (touchpad) or the wiring for F60 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as F60
Maytag lists the user interface (touchpad) or the wiring for F60 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F60 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for F60.

Cut power at the breaker for a minute, restore it, then check for F60.
Give the cooktop a minute on screen after the reset; a returning F60 means schedule a visit.
Do not pry at the panel; the keypad connections are bench work.
Write down the model and serial numbers and the exact F60 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionA electric cooktop showing F60 is, per Maytag, dealing with a possible problem in the user interface (touchpad) or the wiring. The page adds no diagnosis.
Read the supporting manualTake the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F60 stays away, the reset did its job.
Read the supporting manualMaytag lists the cooktop power control board or the wiring against F58, while F60 gets the user interface (touchpad) or the wiring. They are neighbors in the electric cooktop list but separate entries.
Read the supporting manualIf the display jumps or keys misfire, leave the electric cooktop off until a technician has looked. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12851 / PH 12851 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11995 / PH 11995 (electric cooktop)
Facts for F60 are from the electric cooktop table (PH 12851) of Maytag Product Help, checked November 2026; no model list is printed.
F60 is printed against the user interface (touchpad) or the wiring; the page does not narrow it down.
Try it first: one minute off, one minute on screen. If F60 persists, a technician should look.
No. the user interface (touchpad) or the wiring are all candidates and the page gives no way to choose.
The model and serial numbers, the exact display for F60, and what the electric cooktop was doing at the time.
Maytag codes, symptoms, parts and service
For F58, the Maytag electric cooktop page points to the cooktop power control board or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.