What it means
For F61, the Maytag electric cooktop page points to the user interface (touch control), the power control module, the electrical supply or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Maytag cooktop F61 / User interface
For F61, the Maytag electric cooktop page points to the user interface (touch control), the power control module, the electrical supply or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Also printed as F61
For F61, the Maytag electric cooktop page points to the user interface (touch control), the power control module, the electrical supply or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F61 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Check that your appliance is an electric cooktop and copy F61 exactly as the display shows it.

Breaker off for one full minute, then back on, and look for F61.
Run the cooktop briefly after the reset and see whether F61 comes back.
Check whether the electric cooktop still lights and answers touch while F61 shows.
Keep the model number close and note when F61 appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definition
Component reference
The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64.
Read the definitionFor F61 the electric cooktop entry names the user interface (touch control), the power control module, the electrical supply or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether F61 comes back.
Read the supporting manualF60 sits beside F61 on the electric cooktop page and names the user interface (touchpad) or the wiring; the code names the user interface (touch control), the power control module, the electrical supply or the wiring.
Read the supporting manualIf any area heats without being set, turn off the breaker and schedule a visit. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12863 / PH 12863 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11996 / PH 11996 (electric cooktop)
Scope for F61: Maytag electric cooktop, PH 12863, checked November 2026. Maytag lists no models on the F61 page.
F61 is printed against the user interface (touch control), the power control module, the electrical supply or the wiring; the page does not narrow it down.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F61 returns, schedule a visit.
The list is the user interface (touch control), the power control module, the electrical supply or the wiring; testing on site settles it.
Tell us the model, the display wording and when F61 first showed up.
Maytag codes, symptoms, parts and service
Maytag lists the user interface (touchpad) or the wiring for F60 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.