Maytag cooktop F63 / User interface

Maytag cooktop
error code F63

Cooktop / display reference

The Maytag electric cooktop entry for F63 names the user interface (touch control), the power control module, the electrical supply or the wiring. Reset first, then call us in if the code keeps coming back.

Also printed as F63

Last reviewed

Cooktop / display reference
Meaning
The Maytag electric cooktop entry for F63 names the user interface (touch control), the power control module, the electrical supply or the wiring. Reset first, then call us in if the code keeps coming back.
Who handles it
Reset, then book
Related codes
Source
F63 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop F63 means.

What it means

The Maytag electric cooktop entry for F63 names the user interface (touch control), the power control module, the electrical supply or the wiring. Reset first, then call us in if the code keeps coming back.

What you can safely check

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

When to call a technician

F63 repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop F63: Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

  2. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Match the label on your appliance to the electric cooktop list before you rely on the wording for F63.

  3. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Cut power at the breaker for a minute, restore it, then check for F63.

  4. Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the cooktop briefly after the reset and see whether F63 comes back.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    The power control board sits inside the electric cooktop and is left to a technician.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact F63 wording before you call.

Does F63 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop with a row of round touch keys and a small dim display along the front edge, set in a granite counter

Component reference

Cooktop touch control (user interface or touchpad)

The touch control is the keypad on a Maytag electric cooktop.

Read the definition
Black glass electric cooktop from above with two radiant elements glowing red and two cooking areas off, on a butcher-block counter

Component reference

Cooktop power control board (power control module)

The power control board, called the power control module on some pages, is the cooktop part that Maytag Product Help names for F40, F42, F43, F47, F58 and F64.

Read the definition

A little more context.

What lies behind F63 on a Maytag electric cooktop?

F63 is printed against the user interface (touch control), the power control module, the electrical supply or the wiring. Maytag words it as a possible problem, not a finding.

Read the supporting manual

What goes first when the electric cooktop flashes F63?

Take the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F63 stays away, the reset did its job.

Read the supporting manual

How far apart are F63 and F61?

F61 and F63 name the same suspects in the electric cooktop list; quote the code you actually see when booking.

Read the supporting manual

Can the electric cooktop keep running while F63 is showing?

If any area heats without being set, turn off the breaker and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F63 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12860 / PH 12860 (electric cooktop)

Manufacturer document

F63 - Electric and Induction Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 11997 / PH 11997 (electric cooktop)

F63 comes from Maytag Product Help (PH 12860) for the electric cooktop, read in November 2026; the F63 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F63 mean for a electric cooktop?

Maytag lists the user interface (touch control), the power control module, the electrical supply or the wiring. It is a possible-cause list, not a confirmed failure.

Can a breaker reset fix F63?

It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F63 returns, schedule a visit.

Does F63 point to a single part?

Maytag names the user interface (touch control), the power control module, the electrical supply or the wiring. Which one failed is for a technician with a meter to decide.

What do you need to know about F63?

The model and serial numbers, the exact display for F63, and what the electric cooktop was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.