What it means
Maytag's electric cooktop page words F4 like this: “A pot or pan is too close to the control panel.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag cooktop F4 / User interface
Maytag's electric cooktop page words F4 like this: “A pot or pan is too close to the control panel.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as F4
Maytag's electric cooktop page words F4 like this: “A pot or pan is too close to the control panel.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
F4 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Record F4 character by character and note the product type: electric cooktop.

Power off for five full minutes, then on, and look for F4.
Give the cooktop a minute on screen after the reset; a returning F4 means schedule a visit.
The control board lives behind panels on the electric cooktop; keep them closed.
Keep the model number close and note when F4 appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The electric cooktop entry for F4 reads “A pot or pan is too close to the control panel.” That is the whole explanation Maytag prints.
Read the supporting manualLeave the cooktop off power for five full minutes, switch it back on, and check the display for F4.
Read the supporting manualThe electric cooktop list prints F47 next to the code, but with a different line. Look up the one on your display.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the electric cooktop while it runs. If F4 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12857 / PH 12857 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 11992 / PH 11992 (electric cooktop)
Scope for F4: Maytag electric cooktop, PH 12857, checked November 2026. Maytag lists no models on the F4 page.
Maytag's wording is “A pot or pan is too close to the control panel.” That is the whole entry.
Try it first; five minutes is the printed time. A returning F4 means schedule us.
Nothing about replacing parts is printed for F4.
The model number, what F4 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For F47, the Maytag electric cooktop page points to the cooktop power control board, the user interface (touchpad) or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.