Maytag cooktop C82 / Information

Maytag cooktop
error code C82

Cooktop / display referenceC82

On an electric cooktop, the entry for C82 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Also printed as C82

Last reviewed

Cooktop / display referenceC82
Meaning
On an electric cooktop, the entry for C82 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Who handles it
Reset, then book
Source
C82 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop C82 means.

What it means

On an electric cooktop, the entry for C82 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

C82 returns, or the electric cooktop behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop C82: Close view of a glass cooktop corner with a few red lit segments and indicator dots on the touch control area, a cutting board of vegetables beside it.
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Match the label on your appliance to the electric cooktop list before you rely on the wording for C82.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Wait five minutes without power before you check for C82 again.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Give the cooktop a minute on screen after the reset; a returning C82 means schedule a visit.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look for a pan or an area left running.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Note the model and the moment C82 showed up; both help us plan.

Does C82 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

Which entry in Maytag's electric cooktop list covers C82?

C82 is covered by this wording on the electric cooktop page: “The surface cooking area has overheated and the automatic shutoff was activated.”

Read the supporting manual

How do I handle C82 on the electric cooktop step by step?

Cut power to the cooktop for five minutes at the breaker or by cycling power as the page says, then restore it and see whether C82 comes back.

Read the supporting manual

What separates C82 from C81?

C81 is a neighbor of C82, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Should the family keep using the electric cooktop with C82 showing?

Wait for the electric cooktop to cool before cooking again. Never open a panel on the electric cooktop yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

C82 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 12015 / PH 12015 (electric cooktop)

Facts for C82 are from the electric cooktop table (PH 12015) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say C82 means?

On the electric cooktop page the line is “The surface cooking area has overheated and the automatic shutoff was activated.” No further cause is given.

Can a power-off reset fix C82?

Wait the whole five minutes, not less. If C82 persists, a technician should look.

Is a specific part blamed for C82?

Maytag names no part here. Read the message and follow the steps.

What should I have ready when I schedule for C82?

Tell us the model, the display wording and when C82 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.