What it means
For a electric cooktop showing C83, Maytag prints “The Cooktop has overheated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Maytag cooktop C83 / Information
For a electric cooktop showing C83, Maytag prints “The Cooktop has overheated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Also printed as C83
For a electric cooktop showing C83, Maytag prints “The Cooktop has overheated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Power off at the breaker before any panel comes off; wiring is a technician's job.
C83 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Check that your appliance is an electric cooktop and copy C83 exactly as the display shows it.

Power off for five full minutes, then on, and look for C83.

Run the cooktop briefly after the reset and see whether C83 comes back.
Switch every cooking area off and give the electric cooktop time to cool before judging whether C83 clears.
Write down the model and serial numbers and the exact C83 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
C83 is covered by this wording on the electric cooktop page: “The Cooktop has overheated.”
Read the supporting manualLeave the cooktop off power for five full minutes, switch it back on, and check the display for C83.
Read the supporting manualBeeping or Audio Tones is a neighbor of C83, not a synonym. The reset may overlap; the text does not.
Read the supporting manualHeat messages are warnings, not breakdowns. Never open a panel on the electric cooktop yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12014 / PH 12014 (electric cooktop)
Facts for C83 are from the electric cooktop table (PH 12014) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag's wording is “The Cooktop has overheated.” That is the whole entry.
Wait the whole five minutes, not less. If C83 persists, a technician should look.
Maytag names no part here. Read the message and follow the steps.
Model and serial numbers plus a note of what happened when C83 appeared.
Maytag codes, symptoms, parts and service
Maytag's electric cooktop page words Beeping or Audio Tones like this: “Food, liquid, other contaminants, or an object, are putting pressure on the User Interface (Touchpad).” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.