What it means
On an electric cooktop, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Maytag cooktop Lock / Display and signals
On an electric cooktop, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Also printed as Lock
On an electric cooktop, the entry for Lock says “The Control Lock avoids unintended use of the surface cooking areas.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Power off at the breaker before any panel comes off; wiring is a technician's job.
Lock returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Record Lock character by character and note the product type: electric cooktop.

Cut power at the breaker for a minute, restore it, then check for Lock.
Run the cooktop briefly after the reset and see whether Lock comes back.
Ask yourself whether a power cut, storm or cleaning cycle came just before Lock.
Keep the model number close and note when Lock appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
The electric cooktop entry for Lock reads “The Control Lock avoids unintended use of the surface cooking areas.” That is the whole explanation Maytag prints.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether Lock returns.
Read the supporting manualThe electric cooktop list prints Indicator or Display Flashing next to Lock, but with a different line. Look up the one on your display.
Read the supporting manualThe control runs everything on the electric cooktop, so a returning Lock is a reason to stop using it. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12021 / PH 12021 (electric cooktop)
Lock comes from Maytag Product Help (PH 12021) for the electric cooktop, read in November 2026; the Lock entry names no models.
While Lock shows on an electric cooktop, the help page states “The Control Lock avoids unintended use of the surface cooking areas.” Nothing else is added.
Try it first: one minute off, one minute on screen. If it persists, a technician should look.
Maytag names no part here. Read the message and follow the steps.
The model and serial numbers, the exact display wording, and what the electric cooktop was doing at the time.
Maytag codes, symptoms, parts and service
Indicator or Display Flashing on a Maytag electric cooktop is explained as “This is indicating that one or more keys are permanently pressed.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.