What it means
On an electric cooktop, the entry for Indicator or Hot Light On says “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag cooktop Indicator or Hot Light On / User interface
On an electric cooktop, the entry for Indicator or Hot Light On says “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as Indicator or Hot Light On
On an electric cooktop, the entry for Indicator or Hot Light On says “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
Indicator or Hot Light On will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for Indicator or Hot Light On.

Leave the breaker off a whole minute before checking for Indicator or Hot Light On again.
Once power is back, keep an eye on the cooktop for about a minute for Indicator or Hot Light On.
Check whether the electric cooktop still lights and answers touch while Indicator or Hot Light On shows.
Keep the model number close and note when Indicator or Hot Light On appeared and what the electric cooktop was doing.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
A lit H or HOT beside a cooking area on a Maytag electric cooktop tells you the glass or coil has not finished cooling, whether or not the control is off.
Read the definitionThe electric cooktop entry for Indicator or Hot Light On reads “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” That is the whole explanation Maytag prints.
Read the supporting manualTurn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether Indicator or Hot Light On comes back.
Read the supporting manualThe electric cooktop list prints H next to Indicator or Hot Light On, but with a different line. Look up the one on your display.
Read the supporting manualKeep the electric cooktop off until Indicator or Hot Light On is explained if touch controls act oddly. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12018 / PH 12018 (electric cooktop)
Scope for Indicator or Hot Light On: Maytag electric cooktop, PH 12018, checked November 2026. Maytag lists no models on the Indicator or Hot Light On page.
On an electric cooktop showing Indicator or Hot Light On, the help page states “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Nothing else is added.
It is the page's first step and costs nothing. A returning Indicator or Hot Light On afterward means schedule us.
Nothing about replacing parts is printed for Indicator or Hot Light On.
Tell us the model, the display wording and when Indicator or Hot Light On first showed up.
Maytag codes, symptoms, parts and service
The Maytag page for H on a electric cooktop states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
A lit H or HOT beside a cooking area on a Maytag electric cooktop tells you the glass or coil has not finished cooling, whether or not the control is off. The hot light also glows while any control is on or an element is hot. Cooling down normally clears it.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.