What it means
On an electric cooktop, the entry for d E says “The cooktop does not switch heat up and the functions do not come on.” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag cooktop d E / Information
On an electric cooktop, the entry for d E says “The cooktop does not switch heat up and the functions do not come on.” No reset is printed for it, so schedule a visit if it keeps appearing.
Also printed as d E
On an electric cooktop, the entry for d E says “The cooktop does not switch heat up and the functions do not come on.” No reset is printed for it, so schedule a visit if it keeps appearing.
Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.
d E will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

Check that your appliance is an electric cooktop and copy d E exactly as the display shows it.

Maytag prints no reset for d E, so record what the cooktop does rather than guessing a fix.

Keep the model number close and note when d E appeared and what the electric cooktop was doing.
Write down the exact words or symbols the electric cooktop shows before you do anything.
Note the model and the moment d E showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Here is what Maytag prints for d E on an electric cooktop: “The cooktop does not switch heat up and the functions do not come on.”
Read the supporting manualNo reset is printed for d E on the electric cooktop page. Writing down what the cooktop does around the code is the useful thing to do.
Read the supporting manualThe electric cooktop list prints Other F Code next to d E, but with a different line. Look up the one on your display.
Read the supporting manualUse the electric cooktop if it behaves normally; stop if there are odd noises, smells or heat. If d E keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12026 / PH 12026 (electric cooktop)
Facts for d E are from the electric cooktop table (PH 12026) of Maytag Product Help, checked November 2026; no model list is printed.
The help page states “The cooktop does not switch heat up and the functions do not come on.” Nothing else is added.
Nothing is printed for it, so record the display and schedule us if d E continues.
Not by itself; the page stops at the line it prints.
Model and serial numbers plus a note of what happened when d E appeared.
Maytag codes, symptoms, parts and service
Maytag lists the user interface (touchpad), the cooktop power control board or the wiring for Other F Code on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.