Maytag cooktop FC RR / Heating

Maytag cooktop
error code FC RR

Cooktop / display referenceFC RR

For FC RR, the Maytag electric cooktop page points to the right rear hotplate (cooking surface/burner/element) or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Also printed as FC RR

Last reviewed

Cooktop / display referenceFC RR
Meaning
For FC RR, the Maytag electric cooktop page points to the right rear hotplate (cooking surface/burner/element) or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.
Who handles it
Reset, then book
Source
FC RR - Electric Cooktop - Product Help | Maytag

What Maytag cooktop FC RR means.

What it means

For FC RR, the Maytag electric cooktop page points to the right rear hotplate (cooking surface/burner/element) or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

FC RR will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop FC RR: Stainless saucepan of water on a glass cooktop zone glowing orange-red, the other zones dark, a row of touch controls along the front edge.
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Match the label on your appliance to the electric cooktop list before you rely on the wording for FC RR.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Leave the breaker off a whole minute before checking for FC RR again.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Run the cooktop briefly after the reset and see whether FC RR comes back.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Do not lift or force a surface element; its connections are live under the glass.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when FC RR appeared and what the electric cooktop was doing.

Does FC RR keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop element.

Conceptual Cooktop sectionCooking zoneTemperature sensorPower boardTouch control1234
  1. 1Cooking zone
  2. 2Temperature sensor

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop with one radiant ring glowing red and a row of touch control circles below

Component reference

Cooktop hotplate and touch control (F12)

Maytag Product Help prints two meanings for F12 on an electric cooktop.

Read the definition

A little more context.

What is Maytag saying with FC RR on your electric cooktop?

FC RR is printed against the right rear hotplate (cooking surface/burner/element) or the wiring. Maytag words it as a possible problem, not a finding.

Read the supporting manual

What goes first when the electric cooktop flashes FC RR?

Turn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether FC RR comes back.

Read the supporting manual

Is FC RR the same as FC RF on a electric cooktop?

Read the exact display: FC RF means the right front hotplate (cooking surface/burner/element) or the wiring on the electric cooktop page, and FC RR means the right rear hotplate (cooking surface/burner/element) or the wiring.

Read the supporting manual

Do I switch the electric cooktop off when FC RR comes up?

If an area stays on by itself, switch the electric cooktop off at the breaker. Never open a panel on the electric cooktop yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

FC RR - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12869 / PH 12869 (electric cooktop)

Manufacturer document

FC RR - Electric and Induction Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 12011 / PH 12011 (electric cooktop)

Facts for FC RR are from the electric cooktop table (PH 12869) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read FC RR on my electric cooktop?

The electric cooktop page ties FC RR to the right rear hotplate (cooking surface/burner/element) or the wiring without saying which has failed.

Should I reset the power for FC RR?

Try it first: one minute off, one minute on screen. If FC RR persists, a technician should look.

Does FC RR point to a single part?

No. the right rear hotplate (cooking surface/burner/element) or the wiring are all candidates and the page gives no way to choose.

What helps most on the first visit for FC RR?

Tell us the model, the display wording and when FC RR first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.