What it means
FC LR on your electric cooktop is tied by Maytag to the left front hotplate (cooking surface/burner/element) or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Maytag cooktop FC LR / Heating
FC LR on your electric cooktop is tied by Maytag to the left front hotplate (cooking surface/burner/element) or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Also printed as FC LR
FC LR on your electric cooktop is tied by Maytag to the left front hotplate (cooking surface/burner/element) or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
Power off at the breaker before any panel comes off; wiring is a technician's job.
FC LR will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Record FC LR character by character and note the product type: electric cooktop.

Leave the breaker off a whole minute before checking for FC LR again.

Run the cooktop briefly after the reset and see whether FC LR comes back.
Make sure pans sit flat and centered on the electric cooktop.
Note the model and the moment FC LR showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag Product Help prints two meanings for F12 on an electric cooktop.
Read the definitionFor FC LR the electric cooktop entry names the left front hotplate (cooking surface/burner/element) or the wiring. Nothing in it says which of them has failed.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether FC LR returns.
Read the supporting manualFC LF and FC LR name the same suspects in the electric cooktop list; quote the code you actually see when booking.
Read the supporting manualIf an area stays on by itself, switch the electric cooktop off at the breaker. If FC LR keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12867 / PH 12867 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12009 / PH 12009 (electric cooktop)
FC LR comes from Maytag Product Help (PH 12867) for the electric cooktop, read in November 2026; the FC LR entry names no models.
The electric cooktop page ties FC LR to the left front hotplate (cooking surface/burner/element) or the wiring without saying which has failed.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If FC LR returns, schedule a visit.
Maytag names the left front hotplate (cooking surface/burner/element) or the wiring. Which one failed is for a technician with a meter to decide.
Model and serial numbers plus a note of what happened when FC LR appeared.
Maytag codes, symptoms, parts and service
The Maytag electric cooktop entry for FC LF names the left front hotplate (cooking surface/burner/element) or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Maytag Product Help prints two meanings for F12 on an electric cooktop. One page points to a hotplate (cooking surface, burner or element) or its wiring. Another says there is an internal communication error on the touch control module. Both give a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.