Maytag cooktop FC RF / Heating

Maytag cooktop
error code FC RF

Cooktop / display referenceFC RF

The Maytag electric cooktop entry for FC RF names the right front hotplate (cooking surface/burner/element) or the wiring. Reset first, then call us in if the code keeps coming back.

Also printed as FC RF

Last reviewed

Cooktop / display referenceFC RF
Meaning
The Maytag electric cooktop entry for FC RF names the right front hotplate (cooking surface/burner/element) or the wiring. Reset first, then call us in if the code keeps coming back.
Who handles it
Reset, then book
Related codes
Source
FC RF - Error Code - Electric Cooktop - Product Help | Maytag

What Maytag cooktop FC RF means.

What it means

The Maytag electric cooktop entry for FC RF names the right front hotplate (cooking surface/burner/element) or the wiring. Reset first, then call us in if the code keeps coming back.

What you can safely check

Power off at the breaker before any panel comes off; wiring is a technician's job.

When to call a technician

FC RF returns, or the electric cooktop behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop FC RF: Stainless saucepan of water on a glass cooktop zone glowing orange-red, the other zones dark, a row of touch controls along the front edge.
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power off at the breaker before any panel comes off; wiring is a technician's job.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record FC RF character by character and note the product type: electric cooktop.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the power

    Leave the breaker off a whole minute before checking for FC RF again.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Give the cooktop a minute on screen after the reset; a returning FC RF means schedule a visit.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Make sure pans sit flat and centered on the electric cooktop.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact FC RF wording before you call.

Does FC RF keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop element.

Conceptual Cooktop sectionCooking zoneTemperature sensorPower boardTouch control1234
  1. 1Cooking zone
  2. 2Temperature sensor

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Black glass electric cooktop with one radiant ring glowing red and a row of touch control circles below

Component reference

Cooktop hotplate and touch control (F12)

Maytag Product Help prints two meanings for F12 on an electric cooktop.

Read the definition

A little more context.

What should a electric cooktop owner take from FC RF?

The electric cooktop list ties FC RF to the right front hotplate (cooking surface/burner/element) or the wiring. That is a set of candidates, and the page does not pick one.

Read the supporting manual

Which first steps does Maytag give for FC RF?

Take the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if FC RF stays away, the reset did its job.

Read the supporting manual

Is FC RF the same as FC LR on a electric cooktop?

FC LR sits beside FC RF on the electric cooktop page and names the left front hotplate (cooking surface/burner/element) or the wiring; the code names the right front hotplate (cooking surface/burner/element) or the wiring.

Read the supporting manual

Should the family keep using the electric cooktop with FC RF showing?

Use only the cooking areas that behave and leave the named one alone. If FC RF keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

FC RF - Error Code - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12010 / PH 12010 (electric cooktop)

Scope for FC RF: Maytag electric cooktop, PH 12010, checked November 2026. Maytag lists no models on the FC RF page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say FC RF means?

Maytag lists the right front hotplate (cooking surface/burner/element) or the wiring. It is a possible-cause list, not a confirmed failure.

Will a one-minute breaker reset clear FC RF?

Yes, give it the whole minute. If FC RF is still there afterward, schedule a visit.

Does FC RF point to a single part?

Maytag names the right front hotplate (cooking surface/burner/element) or the wiring. Which one failed is for a technician with a meter to decide.

What should I have ready when I schedule for FC RF?

The model and serial numbers, the exact display for FC RF, and what the electric cooktop was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.