Maytag cooktop H / User interface

Maytag cooktop
error code H

Cooktop / display referenceH

The Maytag page for H on a electric cooktop states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Also printed as H

Last reviewed

Cooktop / display referenceH
Meaning
The Maytag page for H on a electric cooktop states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.
Who handles it
Reset, then book
Source
Displaying H or HOT - Electric Cooktop - Product Help | Maytag

What Maytag cooktop H means.

What it means

The Maytag page for H on a electric cooktop states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

What you can safely check

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

When to call a technician

H repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag cooktop H: Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

  2. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Check that your appliance is an electric cooktop and copy H exactly as the display shows it.

  3. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Leave the breaker off a whole minute before checking for H again.

  4. Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Once power is back, keep an eye on the cooktop for about a minute for H.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Do not pry at the panel; the keypad connections are bench work.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Write it down

    Write down the model and serial numbers and the exact H wording before you call.

Does H keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

A smooth-top cooktop with a burner ring still glowing red and a small red hot-surface light lit beside it.

Component reference

Cooktop hot-surface indicator (H, HOT)

A lit H or HOT beside a cooking area on a Maytag electric cooktop tells you the glass or coil has not finished cooling, whether or not the control is off.

Read the definition

A little more context.

What lies behind H on a Maytag electric cooktop?

Here is what Maytag prints for the code on an electric cooktop: “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even after the surface cooking area(s) is...”

Read the supporting manual

Which first steps does Maytag give for H?

Take the cooktop off power at the breaker for a full minute. Put it back on and give it a minute of watching; if H stays away, the reset did its job.

Read the supporting manual

Is H the same as d E on a electric cooktop?

d E is a separate entry from H on the electric cooktop page, with its own wording.

Read the supporting manual

Can the electric cooktop keep running while H is showing?

A keypad problem is about control. If keys seem to press themselves, switch the electric cooktop off at the breaker. If H keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

Displaying H or HOT - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 12017 / PH 12017 (electric cooktop)

Facts for H are from the electric cooktop table (PH 12017) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read H on my electric cooktop?

With H on the electric cooktop, the help page states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even after the surface cooking area(s) is...” Nothing else is added.

Will a one-minute breaker reset clear H?

Try it first: one minute off, one minute on screen. If H persists, a technician should look.

Is a specific part blamed for H?

Nothing about replacing parts is printed for H.

What should I have ready when I schedule for H?

The model and serial numbers, the exact display for H, and what the electric cooktop was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.