Inside the appliance
Cooktop hot-surface indicator (H, HOT). In plain English.
A lit H or HOT beside a cooking area on a Maytag electric cooktop tells you the glass or coil has not finished cooling, whether or not the control is off. The hot light also glows while any control is on or an element is hot. Cooling down normally clears it.

Where it fits.
Cooktop hot-surface indicator (H, HOT) in the appliance
The H appears in the heat setting display next to each cooking area.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Cooktop hot-surface indicator (H, HOT) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.

Maytag electric cooktop beeping
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.

Maytag electric cooktop will not turn on or heat
When a Maytag electric cooktop will not turn on or heat, Product Help points to Control Lock, no pan detected, a pan too close to the controls, the automatic shutoff after long use, or the wrong cookware. Unlock it, recenter a suitable pan, wait for the shutoff to clear, and book a technician if nothing responds.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Check every control
Each knob or touch control should sit at off.
- 2
Wait it out
Keep hands clear and give the surface time. The H goes dark as the area cools.
- 3
Reset if it lingers
If H is still lit or blinking on a cold surface, cut the cooktop circuit at the panel for sixty seconds, restore it, then test a burner.
- 4
Stay nearby
Hang around briefly to see whether the light reappears.
Cleaning or replacement?
Leave internal testing to a technician.
H stays lit well after the glass feels cold.
The H keeps blinking following the breaker reset.
A hot light glows with every control off and the surface cold.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Cooktop hot-surface indicator (H, HOT) advice. Read the manual for your own model.
- Displaying H or HOT - Electric Cooktop - Product Help | Maytag
- Indicator or Hot Light On - Electric Cooktop - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What is the H on my Maytag cooktop telling me?
That one of the heating zones is too warm to handle, with or without its control on.
When does H go away?
After the area cools. Let the cooktop cool first.
What if it is still lit when cold?
De-energize the circuit for sixty seconds, re-energize it, and test a burner.
Why does the hot light glow with nothing cooking?
Either a control was left on or an element has not cooled.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag electric cooktop beeping
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
Cooktop repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.

