Start from the symptom
Maytag ice maker undercounter ice maker making little or no ice.
If a Maytag undercounter ice maker makes no ice, the water filter may not be locked into its housing, which stops production. A clogged filter or one past its schedule can also cut output. Re-seat it, replace it if due, or run without it in bypass until you can.

Start with safe observations.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Filter lock
Rotate the filter clockwise until it locks, with the arrow on its head matching the locked symbol. An unlocked filter means no ice at all.
- 2
Replacement schedule
The general guide is a new filter every six months or 2,000 gallons, when the indicator lights, or sooner if needed. Hard water or heavy use shortens its life.
- 3
Clogged filter
With a clogged filter you cannot replace yet, leave it out. The water system then runs in bypass.
- 4
O-rings
When fitting a new filter, check the O-rings stay in place after the cover is removed.
- 5
Status reset
The filter status resets itself after the water filter is replaced.
More about this symptom.
Why is my Maytag ice maker not making ice?#
An unlocked filter halts ice production. Rotate it clockwise until the alignment arrow meets the locked symbol. 1
How long does the filter last?#
The guide is six months or 2,000 gallons, or when the indicator lights. Hard water or heavy use means sooner. 1
What if the filter is clogged?#
Leave it out until you can replace it. The water system runs in bypass and the clogged filter will not hurt performance. 1
Systems a technician may investigate.
These parts tie in to the symptom. Noticing it does not prove that any single one has worn out.

Ice maker water filter (undercounter)
A Maytag undercounter ice maker filter is swapped every six months, at 2000 gallons, when the indicator lights, or as needed; hard water and heavy use can shorten that. Without a full turn into its lock, the filter leaves the ice maker idle.

Ice maker shutoff arm and switch
The wire arm over the bin tells a Maytag ice maker when to quit: rising ice lifts it to OFF. Product Help names an ice maker that was switched off, by arm, switch or digital setting, as a leading cause of no ice.
If the display adds a code.
This topic has no code of its own.
We have linked no other researched dishwasher code to this topic. Compare the exact message with your model’s manual and do not borrow another code from the library.
See the research statusWhen observation becomes a service request.
Leave internal testing to a technician.
The ice maker still makes little or no ice with a correctly locked, current filter or with the filter out.
Water leaks at the filter housing.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Maytag undercounter ice maker making little or no ice advice. Read the manual for your own model.
- When to Change the Water Filter (Freestanding Ice Maker) - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
How often should the undercounter ice maker filter be changed?
Roughly every six months or 2,000 gallons of water, or when the indicator lights.
What happens if the filter is not locked in?
The ice maker will not produce ice. Turn it clockwise until the arrow lines up with the locked symbol.
Can I run it without a filter?
Yes, if the filter is clogged and you cannot replace it at once. The water system bypasses it and keeps working.
What signs say it is time for a new filter?
Decreased ice production or a change in taste or odor suggest an earlier replacement.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag undercounter ice maker making little or no ice
If a Maytag undercounter ice maker makes no ice, the water filter may not be locked into its housing, which stops production. A clogged filter or one past its schedule can also cut output. Re-seat it, replace it if due, or run without it in bypass until you can.
Ice maker shutoff arm and switch
The wire arm over the bin tells a Maytag ice maker when to quit: rising ice lifts it to OFF. Product Help names an ice maker that was switched off, by arm, switch or digital setting, as a leading cause of no ice.
Ice maker repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.