Start from the symptom

Maytag hood showing F or C on the display.

On a Maytag vent hood, F means the grease filter has hit 30 hours of fan operation and C means the charcoal filter has hit 120 hours. They are cleaning reminders, not breakdowns. Wash the filter, then hold FAN for 3 seconds to clear the reminder.

Last reviewed

Stainless steel chimney range hood with two lights on over a glass cooktop between oak cabinets
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.

  1. 1

    F: grease filter

    After 30 hours of fan operation the display shows F while the fan runs. Wash the metal filter in the dishwasher or in hot detergent solution and let it dry thoroughly before replacing it.

  2. 2

    C: charcoal filter

    After 120 hours it shows C. Clean the filter in the dishwasher with normal detergent at the highest temperature setting.

  3. 3

    Reactivating charcoal

    Dry the charcoal filter in an oven for 10 minutes at no more than 210°F (100°C).

  4. 4

    Reset

    Press and hold FAN for 3 seconds. The F or C icon should clear.

More about this symptom.

What does F mean on a Maytag vent hood?#

After 30 hours of fan operation the display shows F while the fan runs. Wash the grease filters often in the dishwasher or hot detergent solution. 1

What does C mean?#

After 120 hours it shows C. The charcoal filter can be washed on the highest dishwasher setting and reactivated by drying it in an oven. 2

How do I clear the reminder?#

Press and hold FAN for 3 seconds. The F or C icon no longer shows. 1 2

When observation becomes a service request.

Leave internal testing to a technician.

The letter comes back straight after the filter is cleaned and reset.

The fan is weak or noisy after the clean.

Arrange a diagnostic

Sources and model boundaries.

These sources stand behind the Maytag hood showing F or C on the display advice. Read the manual for your own model.

  • F - Displayed - Product Help | Maytag
  • C - Displayed - Product Help | Maytag

Follow the guide for your own model, and see how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F mean on my Maytag hood?

The grease filter saturation reminder: after 30 hours of fan operation, F shows when the fan is active.

What does C mean on my Maytag hood?

The charcoal filter reminder: after 120 hours of fan operation, C shows when the fan is active.

How do I reset F or C?

Press and hold FAN for 3 seconds. The icon then goes out.

Can a charcoal filter be reused?

Yes. Product Help says it can be cleaned and reactivated by washing it and drying it in an oven for 10 minutes at up to 210°F (100°C).

Let’s take care of it.

A full hamper waits for no one.
Book the repair.