Inside the appliance
Hood grease filter (F). In plain English.
On a Maytag vent hood, the display shows F after 30 hours of fan operation, which means the grease filters need washing. Product Help says to wash the metal filter in the dishwasher or hot detergent solution, let it dry thoroughly, then clear the alert by holding FAN for 3 seconds.

Where it fits.
Hood grease filter (F) in the appliance
Under the hood, in the filter slots over the cooking surface. The F icon appears on the hood display.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Hood grease filter (F) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Read the F
F shows while the fan is on after 30 hours of operation.
- 2
Wash the filter
Place the metal filter in the dishwasher or hot detergent solution.
- 3
Dry it
Let the filter dry thoroughly before it goes back.
- 4
Clear the alert
Hold FAN for 3 seconds. The F icon no longer shows.
Cleaning or replacement?
Leave internal testing to a technician.
F returns right after cleaning and a reset.
The fan runs but air barely moves.
Grease drips from the hood.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Hood grease filter (F) advice. Read the manual for your own model.
- F - Displayed - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does F mean on my hood?
The grease filter saturation alarm: 30 hours of fan use have passed and the filters should be washed.
Can I put the grease filter in the dishwasher?
Yes. The metal filter may be washed in the dishwasher or in hot detergent solution, per Product Help.
How do I clear F?
Press and hold FAN for 3 seconds.
Do I clean it on a schedule?
The hood tells you: F appears after 30 hours of fan operation.
Maytag codes, symptoms, parts and service
From the message to what you do next.
F
For a vent hood showing the code, Maytag prints “After 30 hours of fan operation, the display will show 'F' when the fan is active.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
Maytag hood showing F or C on the display
On a Maytag vent hood, F means the grease filter has hit 30 hours of fan operation and C means the charcoal filter has hit 120 hours. They are cleaning reminders, not breakdowns. Wash the filter, then hold FAN for 3 seconds to clear the reminder.
Hood repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


