Before work starts
Your technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Independent appliance repair
We repair Maytag vent hoods: a fan that runs weakly, a display showing F or C, grease dripping, or odors that linger. F and C are filter reminders, not breakdowns. Wash the filter first, then book a technician if the hood still does not clear the air.

For a vent hood showing the code, Maytag prints “After 30 hours of fan operation, the display will show 'F' when the fan is active.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
For a vent hood showing C, Maytag prints “After 120 hours of fan operation, the display will show 'C' when the fan is active.” Nothing else is printed, so schedule a visit if it repeats.
We pick the part after we read the model label and test the unit. Nothing is ordered ahead of time, and the quote is yours to approve before any work begins.

On a Maytag vent hood, the display shows F after 30 hours of fan operation, which means the grease filters need washing. Product Help says to wash the metal filter in the dishwasher or hot detergent solution, let it dry thoroughly, then clear the alert by holding FAN for 3 seconds.

On a Maytag vent hood, C appears after 120 hours of fan operation and means the charcoal filter should be washed. Product Help says to wash it in the dishwasher on the hottest setting, reactivate it in an oven for 10 minutes at up to 210 F, and replace it after about three years.
Three steps from request to repair.
You stay in the loop the whole way.

Pick washer or dryer and tell us what it does: no spin, no heat, loud thumping. Book online any time.

The technician tests the machine and quotes the work. You approve the price before a tool comes out.

After the repair the technician runs the machine with you and explains what was changed.
F means 30 hours of fan use. C means 120 hours. Product Help documents only these two on a hood.
The metal filter goes through the dishwasher or gets washed by hand in hot soapy water, and must dry fully before it goes back.
Dishwasher on the hottest setting, then up to 10 minutes in an oven at no more than 210 F.
Hold FAN for 3 seconds. With no charcoal filter fitted, press + and - together for 3 seconds to turn the C alarm off.
F or C shows up again soon after a wash and reset.
The fan spins yet little air comes out.
Grease drips from the hood.
The charcoal filter is crumbling or has seen about three years of use.
Arrange a diagnosticYour technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Maytag deals with repairs its warranty covers. Every repair we complete is backed by our workmanship warranty.
Thirty hours of fan operation have passed and the grease filters need washing, per Product Help.
Once the fan has run 120 hours, the charcoal filter needs cleaning. Product Help puts replacement at roughly three years.
Product Help lists only the F and C reminders for hoods, so a failing fan or light needs a technician to test it.
A 3-second press of FAN turns the reminder off.
For a unit still covered by the manufacturer's warranty, the maker takes that repair. After coverage ends, schedule a technician with us and approve the quote first.
Maytag codes, symptoms, parts and service
For a vent hood showing the code, Maytag prints “After 30 hours of fan operation, the display will show 'F' when the fan is active.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
On a Maytag vent hood, F means the grease filter has hit 30 hours of fan operation and C means the charcoal filter has hit 120 hours. They are cleaning reminders, not breakdowns. Wash the filter, then hold FAN for 3 seconds to clear the reminder.
On a Maytag vent hood, the display shows F after 30 hours of fan operation, which means the grease filters need washing. Product Help says to wash the metal filter in the dishwasher or hot detergent solution, let it dry thoroughly, then clear the alert by holding FAN for 3 seconds.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.