What it means
For a vent hood showing C, Maytag prints “After 120 hours of fan operation, the display will show 'C' when the fan is active.” Nothing else is printed, so schedule a visit if it repeats.
Maytag hood C / Fan and airflow
For a vent hood showing C, Maytag prints “After 120 hours of fan operation, the display will show 'C' when the fan is active.” Nothing else is printed, so schedule a visit if it repeats.
Also printed as C
For a vent hood showing C, Maytag prints “After 120 hours of fan operation, the display will show 'C' when the fan is active.” Nothing else is printed, so schedule a visit if it repeats.
As long as C stays on the vent hood, Power off at the breaker before any panel comes off; wiring is a technician's job.
C returns, or the vent hood behaves oddly around the code.
Your Maytag to-do list, saved here on this device

As long as C stays on the vent hood, Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the vent hood list before you rely on the wording for C.

No reset is printed here; note the behavior of the vent hood around C instead.
Note the model and the moment C showed up; both help us plan.
Write down the exact words or symbols the vent hood shows before you do anything.
Note the model and the moment C showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
On a Maytag vent hood, C appears after 120 hours of fan operation and means the charcoal filter should be washed.
Read the definitionHere is what Maytag prints for C on a vent hood: “After 120 hours of fan operation, the display will show 'C' when the fan is active.”
Read the supporting manualNo reset is printed for C on the vent hood page. Writing down what the vent hood does around the code is the useful thing to do.
Read the supporting manualF is a separate entry from C on the vent hood page, with its own wording.
Read the supporting manualWhen in doubt, switch the vent hood off. If C keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-02-17; PH 14654 / PH 14654 (vent hood)
C comes from Maytag Product Help (PH 14654) for the vent hood, read in November 2026; the C entry names no models.
On the vent hood page the line is “After 120 hours of fan operation, the display will show 'C' when the fan is active.” No further cause is given.
Nothing is printed for it, so record the display and schedule us if C continues.
Maytag names no part here. Read the message and follow the steps.
The model number, what C looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For a vent hood showing the code, Maytag prints “After 30 hours of fan operation, the display will show 'F' when the fan is active.” Maytag prints no reset for it; if it keeps appearing, schedule a visit.
On a Maytag vent hood, F means the grease filter has hit 30 hours of fan operation and C means the charcoal filter has hit 120 hours. They are cleaning reminders, not breakdowns. Wash the filter, then hold FAN for 3 seconds to clear the reminder.
On a Maytag vent hood, C appears after 120 hours of fan operation and means the charcoal filter should be washed. Product Help says to wash it in the dishwasher on the hottest setting, reactivate it in an oven for 10 minutes at up to 210 F, and replace it after about three years.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.