Inside the appliance
Hood charcoal filter (C). In plain English.
On a Maytag vent hood, C appears after 120 hours of fan operation and means the charcoal filter should be washed. Product Help says to wash it in the dishwasher on the hottest setting, reactivate it in an oven for 10 minutes at up to 210 F, and replace it after about three years.

Where it fits.
Hood charcoal filter (C) in the appliance
In the hood, beside the grease filters. Product Help says it is not used when the hood is in vented mode.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Hood charcoal filter (C) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Read the C
C shows while the fan runs after 120 hours of operation.
- 2
Wash it
Clean the filter in the dishwasher with normal detergent and the highest temperature setting.
- 3
Reactivate it
Dry it in an oven for 10 minutes at a maximum of 210 F (100 C).
- 4
Clear the alert
Hold FAN for 3 seconds. If you do not use a charcoal filter, hold + and - for 3 seconds to disable the alarm.
Cleaning or replacement?
Leave internal testing to a technician.
C returns right after cleaning.
The filter is crumbling or older than about three years.
Odors linger with a fresh filter.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Hood charcoal filter (C) advice. Read the manual for your own model.
- C - Displayed - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does C mean on my hood?
The charcoal filter saturation alarm after 120 hours of fan operation.
Can a charcoal filter be reused?
Product Help says it can be cleaned and reactivated, and that it should be replaced after about three years of use.
My hood vents outside. Do I need C?
If the charcoal filter is not used, hold + and - together for 3 seconds. F shows for 3 seconds and the charcoal alarm is disabled.
How hot can the oven be?
Product Help says a maximum of 210 F (100 C) for 10 minutes. Stay under it.
Maytag codes, symptoms, parts and service
From the message to what you do next.
C
For a vent hood showing C, Maytag prints “After 120 hours of fan operation, the display will show 'C' when the fan is active.” Nothing else is printed, so schedule a visit if it repeats.
Maytag hood showing F or C on the display
On a Maytag vent hood, F means the grease filter has hit 30 hours of fan operation and C means the charcoal filter has hit 120 hours. They are cleaning reminders, not breakdowns. Wash the filter, then hold FAN for 3 seconds to clear the reminder.
Hood repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


