Inside the appliance

Hood lights and heat lamp. In plain English.

On a Maytag vent hood, the lights are expected to come on whenever the fan runs. Product Help says some bulbs are for owners to swap while others need a service call. A heat lamp takes an infrared bulb that must cool first and carry a rating of 175 watts or less.

Last reviewed

Underside of a stainless range hood with two recessed light sockets while a gloved hand holds a halogen-style bulb up to one
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Hood lights and heat lamp in the appliance

Product Help leaves the bulb positions to your hood's manual.

This image is an example of the component type. It will not tell you which replacement is right for your model.

How you can tell this system is asking for attention.

Hood lights and heat lamp trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.

Owner care, within the model instructions.

Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.

  1. 1

    Check the controls

    Set them as your Owner's Manual describes.

  2. 2

    Power cycle

    Breaker off a minute, back on, then see if the light works.

  3. 3

    Swap with care

    Switch the hood off, let the infrared lamp cool, and hold the new one with a tissue or cotton gloves.

  4. 4

    Respect the wattage

    Each heat lamp bulb should be rated 175 watts maximum.

  5. 5

    Use the heat lamp switch

    High turns the lamps on; Off turns them off.

Cleaning or replacement?

Leave internal testing to a technician.

A new bulb and a reset leave the light dark.

The fan runs while the light never does.

The manual says your bulb needs a service call.

Arrange a diagnostic

Sources and model boundaries.

These sources stand behind the Hood lights and heat lamp advice. Read the manual for your own model.

  • Lights Not Working - Vent Hood - Product Help | Maytag
  • Heat Lamp Not Working - Vent - Product Help | Maytag

Follow the guide for your own model, and see how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Why is my Maytag hood light dark?

Maytag lists the control setting, the bulb and the power. A working fan implies the lights should work.

Is the bulb a DIY swap?

For some bulbs, yes; others need a service call. Your Owner's Manual says which.

What is the largest heat lamp bulb allowed?

175 watts each.

Why not touch the new lamp?

Bare fingers can damage it or shorten its life, so use a tissue or cotton gloves.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.