Start from the symptom

Maytag freezer upright freezer door not sealing or not cooling.

When a Maytag upright freezer door will not seal and the freezer struggles to cool, it is often off level, has shelves or baskets out of position, a package or shipping material blocking the door, or a spot too hot or too cold. Sort those out, and book a technician if air still gets in.

Last reviewed

Hand pulling a paper strip out of the closed door of an upright freezer, with frost forming along the gasket at the corner
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Start with safe observations.

Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.

  1. 1

    Level

    Level the cabinet from one side to the other and from front to rear; a cabinet that leans can stop the door sealing.

  2. 2

    Shelves and baskets

    Misplaced shelves or baskets can block the door from closing or opening, admit moist air that builds frost, and keep the compressor running longer.

  3. 3

    Blockages

    Make sure no food package stops the door or lid from closing. Rearrange containers so they take less space.

  4. 4

    New freezer

    Remove all shipping packaging. Some of it can stop the door opening and closing properly.

  5. 5

    Location

    Keep it away from an oven, radiator or other heat, and out of rooms below 40°F or above 110°F.

  6. 6

    Clearance

    Leave at least 3 in. (7.5 cm) of air space at the top and both sides and 2 in. (2.5 cm) behind it, with extra on the hinge side if it sits against a wall.

More about this symptom.

Why is my Maytag freezer door not sealing?#

Product Help lists four checks: whether the freezer is level, whether shelves or baskets are out of position, whether anything blocks the door or lid, and where it stands. 1

Can the freezer location affect cooling?#

Yes. Heat from an oven or radiator, a room below 40°F or above 110°F, or too little air space around the cabinet all work against it. 1

When does the freezer need a technician?#

Book when the freezer is level, clear of blockages and correctly spaced, yet the door still leaves a gap or the freezer stays warm. 1

If the display adds a code.

Keep the exact message.

We have not yet looked into what the codes on this appliance mean. Rely on its manual and include a photo of the display when you ask for a visit.

See the research status

When observation becomes a service request.

Leave internal testing to a technician.

A gap remains at the door although the cabinet is level and nothing is in the way.

Frost builds quickly or the compressor never rests.

The freezer sits within the clearance and temperature range and still runs warm.

Arrange a diagnostic

Sources and model boundaries.

These sources stand behind the Maytag upright freezer door not sealing or not cooling advice. Read the manual for your own model.

  • Door is Not Sealing - Not Cooling - Upright Freezer - Product Help | Maytag

Follow the guide for your own model, and see how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Can an unlevel freezer cause a door seal problem?

Yes. Product Help says an unlevel freezer can keep the door from sealing, so level it from side to side and from front to back.

How can shelves cause frost?

Shelves or baskets out of position can keep the door from closing, which lets in moisture and air and can cause heavy frost buildup.

What temperature range can it stand in?

Not below 40°F or above 110°F, and not next to an oven, radiator or other heat source.

How much space does it need around it?

At least 3 in. (7.5 cm) above and on both sides and 2 in. (2.5 cm) at the back, with extra space on the hinge side if against a wall.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.