Before work starts
Your technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Independent appliance repair
We repair Maytag dryers, including commercial-grade residential models: a dryer that stays cold, refuses to start, or needs several cycles to dry a load. Book a technician and we test the heat, the power and the airflow on site.


A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.

Thumping, buzzing, knocking and squealing each point somewhere different on a Maytag dryer. New rollers and a flat spot after time off thump and fade by themselves. Pockets, items in the lint chute and a washer next door cause the rest. Squealing from an older dryer can mean a worn belt or pulley.

A new Maytag dryer can give off a semi-burning or oily smell, and Product Help says to run it empty for about 15 minutes. Paint fumes in the room and a damp load left sitting are the other named causes. A hot, scorched smell that fits none of these means switch it off and arrange a visit.
We pick the part after we read the model label and test the unit. Nothing is ordered ahead of time, and the quote is yours to approve before any work begins.

On a Maytag dryer, F3E2 happens when five loads in a row are dried without the moisture sensor registering data. Press Power to clear it. Product Help asks whether the dryer is level and whether a small load or single item missed the sensors. F3E5 is also listed as a moisture sensor code.

F4E1 on a Maytag dryer names the heater or the heater relays as the likely problem. Product Help gives a one-minute breaker reset, then a timed dry cycle while you watch the dryer for one minute. For no heat, run a heated timed cycle for five minutes and feel inside.

Long dry times on a Maytag dryer often trace to airflow. F4E3, AF and Check Vent all say the lint screen or vent is clogged, crushed, kinked or has too many turns. Product Help wants the lint screen cleaned after every use and the home venting every one to two years.
Three steps from request to repair.
You stay in the loop the whole way.

Pick washer or dryer and tell us what it does: no spin, no heat, loud thumping. Book online any time.

The technician tests the machine and quotes the work. You approve the price before a tool comes out.

After the repair the technician runs the machine with you and explains what was changed.
Run a heated timed cycle for 5 minutes with the dryer empty, then open the door and feel inside.
Air Only or Air/Fluff never adds heat.
An electric dryer uses two household breakers or fuses and a 240-volt supply. If a breaker keeps tripping, call an electrician.
Lint screen after every use; home venting every one to two years; 4-inch metal vent; hood clear by 12 in.
F1E1 asks for the breaker off for 5 minutes. F4E1 and F3E2 have their own Product Help pages.
The dryer tumbles but stays cold after the heat test.
The dryer has no power with both breakers on.
F1E1, F4E1 or F3E2 returns after the reset.
Loads still dry slowly although the screen, vent and hood are clear.
Arrange a diagnosticYour technician checks the washer, dryer or other appliance, then gives you the cost. The repair goes ahead only with your okay.
Maytag deals with repairs its warranty covers. Every repair we complete is backed by our workmanship warranty.
Yes. Maytag Product Help has its own commercial-grade residential tree, with a few codes that the standard dryer does not print.
On a new gas or electric dryer, Product Help calls a semi-burning or oily smell normal; run it empty about 15 minutes. If the smell persists, unplug it and book a visit.
Product Help points to the lint screen, a crushed or long vent, and the outside hood first.
The Product Help pages we use cover gas and electric dryers. If you smell gas, go outside and phone your gas company first.
For a unit still covered by the manufacturer's warranty, the maker takes that repair. After coverage ends, schedule a technician with us and approve the quote first.
Maytag codes, symptoms, parts and service
The Maytag page for F1E1 on a Maytag commercial-grade residential dryer or dryer stops at a reset and leaves the cause unstated. To reset it, leave the circuit breaker off for 5 minutes before switching it back on. A repeat of the code after the reset is the cue to schedule a visit with us.
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
On a Maytag dryer, F3E2 happens when five loads in a row are dried without the moisture sensor registering data. Press Power to clear it. Product Help asks whether the dryer is level and whether a small load or single item missed the sensors. F3E5 is also listed as a moisture sensor code.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.