Start from the symptom
Maytag dryer making noise.
Thumping, buzzing, knocking and squealing each point somewhere different on a Maytag dryer. New rollers and a flat spot after time off thump and fade by themselves. Pockets, items in the lint chute and a washer next door cause the rest. Squealing from an older dryer can mean a worn belt or pulley.

Start with safe observations.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Thumping
Rollers flatten after the dryer sits unused, and a new dryer has roller sound in its first cycles. Both ease with regular use. A balled-up sheet or tennis shoes will also thump.
- 2
Buzzing or knocking
Clear the top of the dryer, and leave a gap to the washer, since a spinning washer can shake the cabinet. If the dryer sits on a pedestal, check the drawer for loose items.
- 3
Loose items inside
Zippers, buckles, coins, paper clips and pens can tumble or fall into the lint chute and hit the blower wheel. Take the lint screen out and look in the housing.
- 4
Legs and level
A missing leg or an unlevel floor makes the dryer rock. Replace a missing leg and bring the dryer level in both directions.
- 5
Squealing
Lint build-up can make the belt and pulleys squeak, and may need the back panel removed to clean. On an older dryer, worn belt and pulleys can squeal and may need replacing.
Systems a technician may investigate.
We pick the part after we read the model label and test the unit. Nothing is ordered ahead of time, and the quote is yours to approve before any work begins.

Dryer moisture sensor (F3E2, F3E5)
On a Maytag dryer, F3E2 happens when five loads in a row are dried without the moisture sensor registering data. Press Power to clear it. Product Help asks whether the dryer is level and whether a small load or single item missed the sensors. F3E5 is also listed as a moisture sensor code.

Dryer heater and relays (F4E1)
F4E1 on a Maytag dryer names the heater or the heater relays as the likely problem. Product Help gives a one-minute breaker reset, then a timed dry cycle while you watch the dryer for one minute. For no heat, run a heated timed cycle for five minutes and feel inside.

Dryer lint screen and exhaust vent (F4E3, AF)
Long dry times on a Maytag dryer often trace to airflow. F4E3, AF and Check Vent all say the lint screen or vent is clogged, crushed, kinked or has too many turns. Product Help wants the lint screen cleaned after every use and the home venting every one to two years.
Read the related care guide.

A dryer that tumbles but never warms: check the supply before the machine.
When a Maytag electric dryer tumbles with no heat, check the household supply before the machine: both breakers of its 30-amp, 240-volt circuit, the power cord and the terminal screws. An L2 or F4 E4 code points the same way, and a five-minute breaker reset is the step Maytag gives. F4 E1 names the heater or its relays and uses a one-minute reset. [1][2][3][4]

A code on your dryer: vent, supply or reset?
On a Maytag dryer, group the codes by the first thing each one wants. F4 E3 and the AF or Check Vent light mean airflow: clean the lint screen and vent. F4 E4 and L2 mean the household supply: check both breakers. F1 E1, F3 E3, F4 E1 and F6 E1 mean a breaker reset. PF means the cycle was cut short by a power failure. [1][3][4][5][6][7][8]
When observation becomes a service request.
Leave internal testing to a technician.
Squealing or grinding continues after the loose-item and level checks.
The dryer has to be opened to clear lint or replace a belt or pulley.
The noise comes with a burning smell or an error code.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Maytag dryer making noise advice. Read the manual for your own model.
- Thumping Sound - Dryer - Product Help | Maytag
- Buzzing Sound - Dryer - Product Help | Maytag
- Knocking or Rattling Sound - Dryer - Product Help | Maytag
- Squealing or Squeaking Sound - Dryer - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
Why does my Maytag dryer thump at the start of a cycle?
If it has not run for a while, the drum support rollers can flatten where they touch the drum. Product Help says the thump should stop after the dryer has run for some time.
Can the washer make my dryer buzz?
Yes. When the washer spins, the dryer cabinet can vibrate against it. Leave space between the two, and clear anything resting on top or against the dryer.
What makes a dryer squeal?
Product Help names lint build-up around the belt and pulleys, and wear on those parts as a dryer ages. Either can need a service visit, since the back panel comes off.
What if a coin falls into the lint chute?
It can hit the blower wheel and knock. Take the lint screen out, look into the housing, and use a dryer lint brush to remove what you see. Run the dryer with the screen back in.
Maytag codes, symptoms, parts and service
From the message to what you do next.
F4E3
F4E3 on a Maytag commercial-grade residential dryer is explained as “An F4 E3 (Restricted Air Flow) error code indicates that the lint screen or vent is clogged; the vent may be...” No reset is printed for it, so schedule a visit if it keeps appearing.
Maytag dryer will not start
A Maytag dryer that does nothing is usually a power, lock or latch issue before it is a broken part. An electric dryer draws on two breakers or fuses and needs 240 volts, the Control Lock may be on, and the door may look shut without latching. Check these, then book a technician.
Dryer repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.