Inside the appliance
Dishwasher fill valve (F8E5, F8E2, H2O). In plain English.
F8E5 on a Maytag dishwasher lists a fill valve stuck open, and the page leads with stopping the water. Product Help says to shut the water supply when you can reach it, press Cancel one time to quiet the tone, and close the door. Leave power on unless the water cannot be stopped.

Where it fits.
Dishwasher fill valve (F8E5, F8E2, H2O) in the appliance
Where the water supply line meets the dishwasher. Product Help does not show the part position for your model.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Dishwasher fill valve (F8E5, F8E2, H2O) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Shut off the water
Close the supply valve first if you can get to it.
- 2
Silence the tone
Press Cancel one time, then close the door.
- 3
Keep power on
Product Help says to leave power on and keep the door closed.
- 4
Power off only if needed
When the water supply cannot be shut off, switch off power at the dishwasher.
Cleaning or replacement?
Leave internal testing to a technician.
F8E5 appears at all.
Water is on the floor.
F8E2 comes back after a 30-second power cycle and an inlet inspection.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher fill valve (F8E5, F8E2, H2O) advice. Read the manual for your own model.
- F8E5 - Dishwasher - Product Help | Maytag
- F8E2- Dishwasher - Product Help | Maytag
- 8 Pause 1 Pause - pause, repeat - Error Code - Dishwasher - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does F8E5 mean?
Fill Valve Stuck Open is the Potential Cause on the Maytag page. Stop water to the dishwasher at once.
Why not just cut power?
The page says not to and gives no reason. It says to turn off power only when you cannot turn the water supply off.
What is F8E2?
Product Help lists a Fill Valve Electric Error and suggests inspecting the inlet connection for leaks, then a power cycle.
What does H2O mean?
Not Detecting Water. Confirm the water supply is open and the hose is free of kinks.
Maytag codes, symptoms, parts and service
From the message to what you do next.
Maytag dishwasher F8E5 error code
For a Maytag dishwasher, Maytag's page for F8E5 says the potential cause it lists is: the fill valve has stuck in the open position. Close the water line to the dishwasher, keep the door shut, then schedule a visit with us.
Maytag dishwasher burning smell
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
Dishwasher repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


