What it means
For a Maytag dishwasher, Maytag's page for F8E5 says the potential cause it lists is: the fill valve has stuck in the open position. Close the water line to the dishwasher, keep the door shut, then schedule a visit with us.
Maytag dishwasher F8E5 / Water and drain
For a Maytag dishwasher, Maytag's page for F8E5 says the potential cause it lists is: the fill valve has stuck in the open position. Close the water line to the dishwasher, keep the door shut, then schedule a visit with us.
Also printed as F8E5
For a Maytag dishwasher, Maytag's page for F8E5 says the potential cause it lists is: the fill valve has stuck in the open position. Close the water line to the dishwasher, keep the door shut, then schedule a visit with us.
Water is involved: close the water line to the dishwasher first and keep the door shut.
Water has collected around the dishwasher.
Your Maytag to-do list, saved here on this device

Check the exact spelling of F8E5 on the display (capitals, spaces, dashes) along with the product type: dishwasher.

Maytag's pages ask you to close the water line to the dishwasher and keep the door shut.

Maytag's pages ask you to keep the door shut until the water line is closed.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F8E5 on a Maytag dishwasher lists a fill valve stuck open, and the page leads with stopping the water.
Read the definitionMaytag's page says the potential cause it lists is: the fill valve has stuck in the open position.
Read the supporting manualThe page asks for the water line to be closed and the door kept shut. Its potential cause is a fill valve that is stuck open.
Read the supporting manualNo reset interval is printed for it.
Read the supporting manualSchedule one with us if F8E5 reappears once the water supply is back on. Have the exact display wording and the model number ready.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-06-15; PH 12612 / PH 12612 (dishwasher)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-06-15; PH 12633 / PH 12633 (dishwasher)
Scope: Maytag dishwasher. Source pages: Maytag Product Help, PH 12612, 12633, checked November 2026.
Maytag's page says the potential cause it lists is: the fill valve has stuck in the open position.
No reset interval is printed on the page. Note when the message appears, and schedule a visit if it will not clear.
Yes. The page names fill valve, worded as a possible problem and not as a confirmed failure.
Schedule one if F8E5 reappears once the water supply is back on. Until then, the steps above are all the page asks of you.
Maytag codes, symptoms, parts and service
F8E4 on a Maytag dishwasher: Maytag's reading table gives water in the drip tray as the cause, while the F8E4 pages print install checks and safety steps. Close the water line, leave the door latched and schedule a visit with us.
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
F8E5 on a Maytag dishwasher lists a fill valve stuck open, and the page leads with stopping the water. Product Help says to shut the water supply when you can reach it, press Cancel one time to quiet the tone, and close the door. Leave power on unless the water cannot be stopped.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.