Inside the appliance
Dishwasher diverter (FAE4, FAE5). In plain English.
On a Maytag dishwasher, FAE4 lists a diverter valve error and FAE5 lists a diverter leak. For FAE5, Product Help says to check for leaks under the dishwasher, make sure water connections are secure, press Cancel twice and start a new cycle. FAE4 gets a 30-second power reset.

Where it fits.
Dishwasher diverter (FAE4, FAE5) in the appliance
Product Help does not say where the diverter sits on your model. A technician finds it during the visit.
This image is an example of the component type. It will not tell you which replacement is right for your model.
How you can tell this system is asking for attention.
Dishwasher diverter (FAE4, FAE5) trouble can show up along with weaker performance or a code that keeps coming back. It takes testing to say whether this component is the reason.
Owner care, within the model instructions.
Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.
- 1
Look for water
Check under and around the dishwasher for leaks.
- 2
Tighten connections
Make sure all water connections are secure.
- 3
Press Cancel twice
This is the FAE5 step. Then try a new cycle.
- 4
Cycle power
Product Help says to unplug the dishwasher for 30 seconds, or turn its breaker off for 30 seconds, then restore power.
Cleaning or replacement?
Leave internal testing to a technician.
FAE4 or FAE5 returns after the checks.
Water appears on the floor.
The dishwasher fills but sprays only one arm.
Arrange a diagnosticSources and model boundaries.
These sources stand behind the Dishwasher diverter (FAE4, FAE5) advice. Read the manual for your own model.
- FAE5 or F10E5 - Dishwasher - Product Help | Maytag
- FAE4 or F10E4 - Dishwasher - Product Help | Maytag
Follow the guide for your own model, and see how we research these pages.
What does FAE5 mean?
The Potential Cause on Maytag's page is Diverter Leak. The page asks for a leak check and secure connections.
Is FAE5 the same as F10E5?
Yes. Product Help titles the page FAE5 or F10E5.
What does FAE4 mean?
Maytag lists a Diverter Valve Error and offers a power cycle as the home step. A repeat means a technician visit.
Should I keep running cycles?
If water is on the floor, stop and book a technician rather than running more cycles.
Maytag codes, symptoms, parts and service
From the message to what you do next.
FAE4
Maytag Product Help prints FAE4 or F10E4 as “Potential Cause: Diverter Valve Error,” with one step: cycle power. Its leak-check steps belong to the next code, FAE5. If FAE4 returns, book a technician.
Maytag dishwasher burning smell
A burnt smell from a Maytag dishwasher is often plastic or food that fell by the heating element. Let the tub cool for at least 30 minutes, clear the debris, and run a rinse or cleaning cycle. A hot tar or petroleum smell on a new dishwasher is the sound-deadening coating and should fade in 4 to 6 weeks.
Dishwasher repair
Book a diagnostic for your model, done at the machine.
Find your metro
Office details, and the entry information to pass along.


