Model-specific code library

Maytag cooktop User interface codes

23 printed codes in this group: Beeping or Audio Tones, F0, F03, F0E4, F13, F1E1, F22, F4, F40, F47 and 13 more.

Four-burner stainless steel gas cooktop with cast iron grates and four knobs set in a laminate counter
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

User interface codes

Beeping or Audio Tones

Maytag's electric cooktop page words Beeping or Audio Tones like this: “Food, liquid, other contaminants, or an object, are putting pressure on the User Interface (Touchpad).” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Information only
F0

The Maytag page for F0 on a electric cooktop states “An object, liquids, or soils are putting pressure on the control panel.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Information only
F03

F03 on a Maytag electric cooktop is explained as “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.

Reset, then book
F0E4

Maytag prints F0E4 as “an internal communication error on the touch control module.” Turn the breaker off for one minute, back on, and watch the cooktop for one minute. Book a visit if the code comes back.

Reset, then book
F13

The Maytag page for F13 on a electric cooktop states “There is an internal communication error on the touch control module .” Try the one-minute breaker reset, and schedule a visit if the code returns.

Reset, then book
F1E1

On an electric cooktop, the entry for F1E1 says “There has been a loss of communication between the user interface, or keypad, and the appliance manager.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Information only
F22

Maytag words F22 as “an internal communication error on the touch control module.” Reset at the breaker for one minute and watch the cooktop for one minute. The page names no part, so a code that returns needs a visit.

Reset, then book
F4

Maytag's electric cooktop page words F4 like this: “A pot or pan is too close to the control panel.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Information only
F40

F40 on your electric cooktop is tied by Maytag to the user interface (touchpad), the cooktop power control board or the wiring. One reset costs nothing; if the code survives it, schedule a visit.

Reset, then book
F47

For F47, the Maytag electric cooktop page points to the cooktop power control board, the user interface (touchpad) or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
F56

Maytag's electric cooktop page links F56 to the user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
F60

Maytag lists the user interface (touchpad) or the wiring for F60 on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book
F61

For F61, the Maytag electric cooktop page points to the user interface (touch control), the power control module, the electrical supply or the wiring. Treat that as a shortlist, try the reset, and schedule a visit if the code stays.

Reset, then book
F63

The Maytag electric cooktop entry for F63 names the user interface (touch control), the power control module, the electrical supply or the wiring. Reset first, then call us in if the code keeps coming back.

Reset, then book
F64

F64 on an electric cooktop means Maytag suspects the user interface (touch control), the power control module, the electrical supply or the wiring. Begin with the reset; if the code is back afterward, book a technician.

Reset, then book
F6E0

For a electric cooktop showing F6E0, Maytag prints “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Information only
F6E4

On an electric cooktop, the entry for F6E4 says “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Information only
FCE1

Maytag's electric cooktop page links FCE1 to the cooktop user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
FCE4

Maytag's electric cooktop page links FCE4 to the wire harness connecting the cooktop user interface (touchpad) to the induction module. It does not say which one, so run the reset below and schedule a visit if the code returns.

Reset, then book
H

The Maytag page for H on a electric cooktop states “An H or HOT will display in the heat setting window when any surface cooking area is too hot to touch, even...” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Reset, then book
Indicator or Display Flashing

Indicator or Display Flashing on a Maytag electric cooktop is explained as “This is indicating that one or more keys are permanently pressed.” Switch the breaker off for a minute, then back on; schedule a visit if the code is still there.

Information only
Indicator or Hot Light On

On an electric cooktop, the entry for Indicator or Hot Light On says “A Cooktop Control is still on or an Element(Burner) is still too hot to touch safely.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Information only
Other F Code

Maytag lists the user interface (touchpad), the cooktop power control board or the wiring for Other F Code on the electric cooktop. Reset the power first and watch the display; a returning the code is the cue to book us.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.