What it means
On an electric cooktop, the entry for F6E4 says “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Maytag cooktop F6E4 / User interface
On an electric cooktop, the entry for F6E4 says “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Also printed as F6E4
On an electric cooktop, the entry for F6E4 says “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
F6E4 returns, or the electric cooktop behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for F6E4.

Cut power at the breaker for a minute, restore it, then check for F6E4.
Once power is back, keep an eye on the cooktop for about a minute for F6E4.
Do not pry at the panel; the keypad connections are bench work.
Write down the model and serial numbers and the exact F6E4 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionThe electric cooktop entry for F6E4 reads “There has been a loss of communication between the user interface, or keypad, and the user interface control.” That is the whole explanation Maytag prints.
Read the supporting manualTurn the cooktop's circuit breaker off for one minute, switch it back on, then keep an eye on the cooktop for a further minute to see whether F6E4 comes back.
Read the supporting manualF6E0 is a separate entry from F6E4 on the electric cooktop page, with its own wording.
Read the supporting manualThe electric cooktop is fine to use only if you can start and stop it with certainty. If F6E4 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12866 / PH 12866 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12001 / PH 12001 (electric cooktop)
Scope for F6E4: Maytag electric cooktop, PH 12866, checked November 2026. Maytag lists no models on the F6E4 page.
The electric cooktop page reads “There has been a loss of communication between the user interface, or keypad, and the user interface control.” It prints nothing more about cause.
It is the page's first step and costs nothing. A returning F6E4 afterward means schedule us.
Nothing about replacing parts is printed for F6E4.
The model number, what F6E4 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
For a electric cooktop showing F6E0, Maytag prints “There has been a loss of communication between the user interface, or keypad, and the user interface control.” Try the one-minute breaker reset, and schedule a visit if the code returns.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.