Model-specific code library

Maytag cooktop Information codes

9 printed codes in this group: Beeping on Control of Radiant Element Cooktop, C81, C82, C83, d E, F2, F8, Indicator Lights Not Turning On, U.

Close view of a glass cooktop corner with a few red lit segments and indicator dots on the touch control area, a cutting board of vegetables beside it.
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Information codes

Beeping on Control of Radiant Element Cooktop

Maytag's electric cooktop page words Beeping on Control of Radiant Element Cooktop like this: “Share.” Try the five-minute power-off reset, and schedule a visit if the code returns.

Owner checks first
C81

Maytag's electric cooktop page words C81 like this: “The Cooktop has overheated.” Try the five-minute power-off reset, and schedule a visit if the code returns.

Reset, then book
C82

On an electric cooktop, the entry for C82 says “The surface cooking area has overheated and the automatic shutoff was activated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Reset, then book
C83

For a electric cooktop showing C83, Maytag prints “The Cooktop has overheated.” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Reset, then book
d E

On an electric cooktop, the entry for d E says “The cooktop does not switch heat up and the functions do not come on.” No reset is printed for it, so schedule a visit if it keeps appearing.

Information only
F2

F2 on a Maytag electric cooktop is explained as “'F2' will disappear when the surface cooking area has cooled.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Information only
F8

F8 means the surface cooking area ran too long and its automatic shutoff activated. Turn off the surface area, remove the utensils and let it cool. It is a protective shutoff, not a repair message.

Information only
Indicator Lights Not Turning On

The Maytag page for Indicator Lights Not Turning On on a electric cooktop states “There is no troubleshooting available.” No reset is printed for it, so schedule a visit if it keeps appearing.

Information only
U

Maytag's electric cooktop page words U like this: “U indicates there is no pan detected.” Try the one-minute breaker reset, and schedule a visit if the code returns.

Reset, then book

Let’s take care of it.

A full hamper waits for no one.
Book the repair.