What it means
Maytag's electric cooktop page links FCE1 to the cooktop user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag cooktop FCE1 / User interface
Maytag's electric cooktop page links FCE1 to the cooktop user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as FCE1
Maytag's electric cooktop page links FCE1 to the cooktop user interface (touchpad) or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; wiring is a technician's job.
FCE1 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; wiring is a technician's job.

Match the label on your appliance to the electric cooktop list before you rely on the wording for FCE1.

Breaker off for one full minute, then back on, and look for FCE1.
Once power is back, keep an eye on the cooktop for about a minute for FCE1.
Do not pry at the panel; the keypad connections are bench work.
Note the model and the moment FCE1 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
The touch control is the keypad on a Maytag electric cooktop.
Read the definitionThe electric cooktop list ties FCE1 to the cooktop user interface (touchpad) or the wiring. That is a set of candidates, and the page does not pick one.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the cooktop in view for another minute and note whether FCE1 returns.
Read the supporting manualFCE0 sits beside FCE1 on the electric cooktop page and names the electrical supply, the induction module or the wiring; the code names the cooktop user interface (touchpad) or the wiring.
Read the supporting manualThe electric cooktop is fine to use only if you can start and stop it with certainty. If FCE1 keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-01-22; PH 12872 / PH 12872 (electric cooktop)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2022-03-24; PH 12006 / PH 12006 (electric cooktop)
Facts for FCE1 are from the electric cooktop table (PH 12872) of Maytag Product Help, checked November 2026; no model list is printed.
Maytag lists the cooktop user interface (touchpad) or the wiring. It is a possible-cause list, not a confirmed failure.
It is the page's first step and costs nothing. A returning FCE1 afterward means schedule us.
The list is the cooktop user interface (touchpad) or the wiring; testing on site settles it.
Model and serial numbers plus a note of what happened when FCE1 appeared.
Maytag codes, symptoms, parts and service
Maytag words FCE0 as a possible problem with the electrical supply, the associated wiring or the Induction Module. It gives no home fix beyond the one-minute breaker reset; if FCE0 returns, schedule a technician.
A Maytag electric cooktop that keeps beeping may have something on the control area, Control Lock being turned on or off, or a utensil left on an element too long. Clear and wipe the control panel first. Beeping for more than 15 minutes locks the panel and can show F1E0 on some models.
The touch control is the keypad on a Maytag electric cooktop. It is the part you touch to turn cooking areas on and set heat. Product Help calls it the user interface, touchpad or touch control module, and its F22, FC E1 and F6E0 pages point to it. The first step printed is a one-minute breaker reset.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.