Maytag cooktop FCE0 / Power supply

Maytag cooktop
error code FCE0

Cooktop / display referenceFCE0

Maytag words FCE0 as a possible problem with the electrical supply, the associated wiring or the Induction Module. It gives no home fix beyond the one-minute breaker reset; if FCE0 returns, schedule a technician.

Also printed as FCE0

Last reviewed

Cooktop / display referenceFCE0
Meaning
Maytag words FCE0 as a possible problem with the electrical supply, the associated wiring or the Induction Module. It gives no home fix beyond the one-minute breaker reset; if FCE0 returns, schedule a technician.
Who handles it
Reset, then book
Related codes
Source
FC E0 - Electric Cooktop - Product Help | Maytag

What Maytag cooktop FCE0 means.

What it means

Maytag words FCE0 as a possible problem with the electrical supply, the associated wiring or the Induction Module. It gives no home fix beyond the one-minute breaker reset; if FCE0 returns, schedule a technician.

What you can safely check

Turn the breaker off before you touch anything behind a panel, and leave wiring and supply connections to a technician.

When to call a technician

FCE0 returns after the one-minute breaker reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag cooktop FCE0: Underside of an electric cooktop on a workbench showing the terminal block with black, red and white wires and a green ground wire, and three screwdrivers.
    Illustration. Follow your model’s instructions.
    Before you begin

    Look at the other appliances

    The page names the electrical supply first. If lights or other kitchen appliances act strangely too, say so when you book.

  2. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 2

    Surfaces off, then the breaker

    Turn the breaker off for one minute and back on.

  3. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 3

    Monitor for one minute

    Watch the cooktop for a minute. A code that returns right away is different from one that returns days later.

  4. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 4

    Do not open any panel

    Supply wiring and an induction module are service-level work.

  5. Illustration. Follow your model’s instructions.
    Check 5

    Note whether it is induction

    The word Induction Module means this page is written for an induction cooktop.

Does FCE0 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Cooktop control.

Conceptual Cooktop sectionTouch panelUser interface boardPower boardWiring1234
  1. 4Wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print for FCE0?

There may be a problem with the electrical supply, the associated wiring, or the Induction Module. The electric and induction page adds that you may need a qualified technician.

Read the supporting manual

How does FCE0 differ from the other FC codes?

FCE1 points to the Cooktop User Interface (Touchpad) or its wiring. FCE4 points to the wire harness connecting the touchpad to the Induction Module. FC LF points to the left front hotplate or its wiring. FCE0 is the one that names the electrical supply.

Read the supporting manual

Why does the supply matter?

Naming the supply means the problem may be outside the cooktop. Maytag does not say how to test it.

Read the supporting manual

Does the reset ever solve it?

The page offers it as the first step; a code that clears for good after one minute without power was transient.

Read the supporting manual

The manual behind the message.

Manufacturer document

FC E0 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12861 / PH 12861 (electric cooktop)

Manufacturer document

FC E0 - Electric and Induction Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2022-03-24; PH 12005 / PH 12005 (electric cooktop)

Manufacturer document

FC E1 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12872 / PH 12872 (electric cooktop)

Manufacturer document

FC E4 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12871 / PH 12871 (electric cooktop)

Manufacturer document

FC LF - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 12865 / PH 12865 (electric cooktop)

Maytag Product Help electric cooktop pages PH 12861 and PH 12005 for FCE0, plus the FCE1, FCE4 and FCLF pages. Product Help lists no models for this entry, so the text applies to the cooktop type, not to a named model.

Here to help

Good questions.
Clear answers.

Talk to our team
Is FCE0 a wiring problem?

The page lists wiring alongside the supply and the Induction Module.

What is the Induction Module?

Maytag does not define it on this page; it is named as one of three possible sources.

Should I call an electrician?

The page for the related F25 code does; this one says you may need a qualified technician.

Does FCE0 affect all burners?

Not stated. Tell us which burners still work.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.