Maytag washer HC / Water and drain

Maytag washer
error code HC

Washer / display referenceHC

On a top-load washer, the entry for HC says “If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as HC

Last reviewed

Washer / display referenceHC
Meaning
On a top-load washer, the entry for HC says “If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Owner checks first, then a technician
Source
HC - Error Code - Product Help | Maytag

What Maytag washer HC means.

What it means

On a top-load washer, the entry for HC says “If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Power and water off before any panel comes off; towels down for spills.

When to call a technician

HC repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer HC: Back of a washer with two braided inlet hoses laid on top, their screens visible, plus a drain hose in a standpipe and two shut-off valves on the wall
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power and water off before any panel comes off; towels down for spills.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Record HC character by character and note the product type: top-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    No reset is printed here; note the behavior of the washer around HC instead.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Note the model and the moment HC showed up; both help us plan.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look for water on the floor around the top-load washer before you restart a cycle.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Note the model and the moment HC showed up; both help us plan.

Does HC keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What lies behind HC on a Maytag top-load washer?

The top-load washer entry for HC reads “If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.” That is the whole explanation Maytag prints.

Read the supporting manual

What goes first when the top-load washer flashes HC?

No reset is printed for HC on the top-load washer page. Writing down what the washer does around the code is the useful thing to do.

Read the supporting manual

How far apart are HC and Fd?

Fd is a neighbor of HC, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Should the family keep using the top-load washer with HC showing?

Only restart the top-load washer once the taps are open and the floor is dry. Never open a panel on the top-load washer yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

HC - Error Code - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-07-03; PH 13151 / PH 13151 (top-load washer)

Scope for HC: Maytag top-load washer, PH 13151, checked November 2026. Maytag lists no models on the HC page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say HC means?

Once HC appears on a top-load washer, the help page states “If HC (hot and cold hoses reversed) appears in display, it means the hot and cold inlet hoses have been installed incorrectly.” Nothing else is added.

Is there a reset for HC?

The page prints none. Write down what you see and schedule a visit if HC keeps appearing.

Is a specific part blamed for HC?

Not by itself; the page stops at the line it prints.

What should I have ready when I schedule for HC?

Tell us the model, the display wording and when HC first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.