Maytag washer Wash Light On or Flashing / Water and drain

Maytag washer
error code Wash Light On or Flashing

Washer / display referenceWash Light On or Flashing

For a top-load washer showing Wash Light On or Flashing, Maytag prints “The Wash Light is on or flashing when the water level has not changed for a while, OR water is present, but...” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as Wash Light On or Flashing

Last reviewed

Washer / display referenceWash Light On or Flashing
Meaning
For a top-load washer showing Wash Light On or Flashing, Maytag prints “The Wash Light is on or flashing when the water level has not changed for a while, OR water is present, but...” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Information only
Source
Wash Light On or Flashing - Product Help | Maytag

What Maytag washer Wash Light On or Flashing means.

What it means

For a top-load washer showing Wash Light On or Flashing, Maytag prints “The Wash Light is on or flashing when the water level has not changed for a while, OR water is present, but...” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

When to call a technician

Wash Light On or Flashing returns, or the top-load washer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer Wash Light On or Flashing: Back of a washer with two braided inlet hoses laid on top, their screens visible, plus a drain hose in a standpipe and two shut-off valves on the wall
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Match your model

    Check that your appliance is a top-load washer and copy Wash Light On or Flashing exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    No reset is printed here; note the behavior of the washer around Wash Light On or Flashing instead.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Write down the model and serial numbers and the exact Wash Light On or Flashing wording before you call.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Check both water taps behind the top-load washer are fully open and the hoses are not kinked.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact Wash Light On or Flashing wording before you call.

Does Wash Light On or Flashing keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Top-load washer with the lid raised, seen from above, with water partly filling the tub around the center agitator

Component reference

Washer water level sensing

Water level sensing is how a Maytag washer knows how much water is in the tub.

Read the definition

A little more context.

What does Wash Light On or Flashing stand for on a top-load washer?

The top-load washer entry for Wash Light On or Flashing reads “The Wash Light is on or flashing when the water level has not changed for a while, OR water is present, but the control does not detect the water...” That is the whole explanation Maytag prints.

Read the supporting manual

What is worth doing before I schedule a visit for Wash Light On or Flashing?

Maytag's page for Wash Light On or Flashing gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the washer shows.

Read the supporting manual

How far apart are Wash Light On or Flashing and Multiple Lights Flashing?

The top-load washer list prints Multiple Lights Flashing next to Wash Light On or Flashing, but with a different line. Look up the one on your display.

Read the supporting manual

How careful should I be with the top-load washer while Wash Light On or Flashing is up?

If water collects on the floor, shut the taps and switch the top-load washer off.

Read the supporting manual

The manual behind the message.

Manufacturer document

Wash Light On or Flashing - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-04; PH 13146 / PH 13146 (top-load washer)

Scope for Wash Light On or Flashing: Maytag top-load washer, PH 13146, checked November 2026. Maytag lists no models on the Wash Light On or Flashing page.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say Wash Light On or Flashing means?

The top-load washer page reads “The Wash Light is on or flashing when the water level has not changed for a while, OR water is present, but the control does not detect the water...” It prints nothing more about cause.

Is there a reset for Wash Light On or Flashing?

No; Maytag gives Wash Light On or Flashing no reset steps. If it repeats, schedule a visit.

Is a specific part blamed for Wash Light On or Flashing?

Maytag names no part here. Read the message and follow the steps.

What do you need to know about Wash Light On or Flashing?

Model and serial numbers plus a note of what happened when Wash Light On or Flashing appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.