Maytag washer Fill or Sensing Light On / Water and drain

Maytag washer
error code Fill or Sensing Light On

Washer / display referenceFill or Sensing Light On

The Maytag page for Fill or Sensing Light On on a top-load washer states “When the Start/Stop button is pressed and the Water Level knob is set to Auto Sensing, the washer will fill...” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as Fill or Sensing Light On

Last reviewed

Washer / display referenceFill or Sensing Light On
Meaning
The Maytag page for Fill or Sensing Light On on a top-load washer states “When the Start/Stop button is pressed and the Water Level knob is set to Auto Sensing, the washer will fill...” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Information only
Source
Fill or Sensing Light On - Product Help | Maytag

What Maytag washer Fill or Sensing Light On means.

What it means

The Maytag page for Fill or Sensing Light On on a top-load washer states “When the Start/Stop button is pressed and the Water Level knob is set to Auto Sensing, the washer will fill...” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

When to call a technician

Fill or Sensing Light On repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer Fill or Sensing Light On: Back of a washer with two braided inlet hoses laid on top, their screens visible, plus a drain hose in a standpipe and two shut-off valves on the wall
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record Fill or Sensing Light On character by character and note the product type: top-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    No reset is printed here; note the behavior of the washer around Fill or Sensing Light On instead.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Check the display

    Keep the model number close and note when Fill or Sensing Light On appeared and what the top-load washer was doing.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look at the inlet hoses: hot and cold must be on the right connections.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Write down the model and serial numbers and the exact Fill or Sensing Light On wording before you call.

Does Fill or Sensing Light On keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Top-load washer with the lid raised, seen from above, with water partly filling the tub around the center agitator

Component reference

Washer water level sensing

Water level sensing is how a Maytag washer knows how much water is in the tub.

Read the definition

A little more context.

What is Maytag saying with Fill or Sensing Light On on your top-load washer?

Here is what Maytag prints for Fill or Sensing Light On on a top-load washer: “When the Start/Stop button is pressed and the Water Level knob is set to Auto Sensing, the washer will fill and begin sensing to determine load size...”

Read the supporting manual

How should I react the moment Fill or Sensing Light On appears?

Maytag's page for Fill or Sensing Light On gives no reset or checking steps, so there is no page-approved first move beyond noting exactly what the washer shows.

Read the supporting manual

Is Fill or Sensing Light On the same as Done Light On on a top-load washer?

The top-load washer list prints Done Light On next to Fill or Sensing Light On, but with a different line. Look up the one on your display.

Read the supporting manual

Do I switch the top-load washer off when Fill or Sensing Light On comes up?

A fill problem will not harm you, but do not leave the top-load washer filling unattended.

Read the supporting manual

The manual behind the message.

Manufacturer document

Fill or Sensing Light On - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-04-15; PH 13142 / PH 13142 (top-load washer)

Fill or Sensing Light On comes from Maytag Product Help (PH 13142) for the top-load washer, read in November 2026; the Fill or Sensing Light On entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is Fill or Sensing Light On on a Maytag top-load washer?

On the top-load washer page the line is “When the Start/Stop button is pressed and the Water Level knob is set to Auto Sensing, the washer will fill and begin sensing to determine load size...” No further cause is given.

Does Maytag give a reset for Fill or Sensing Light On?

Nothing is printed for it, so record the display and schedule us if Fill or Sensing Light On continues.

Is a specific part blamed for Fill or Sensing Light On?

Maytag names no part here. Read the message and follow the steps.

What should I tell the technician about Fill or Sensing Light On?

The model and serial numbers, the exact display for Fill or Sensing Light On, and what the top-load washer was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.