What it means
On a top-load washer, F3E5 is headed “Mini Dispenser” with the note “Please add detergent manually.” The front-load page prints only a reset. Add detergent by hand, reset for 5 minutes, and book a visit if it returns.
Maytag washer F3E5 / Water and drain
On a top-load washer, F3E5 is headed “Mini Dispenser” with the note “Please add detergent manually.” The front-load page prints only a reset. Add detergent by hand, reset for 5 minutes, and book a visit if it returns.
Also printed as F3E5
On a top-load washer, F3E5 is headed “Mini Dispenser” with the note “Please add detergent manually.” The front-load page prints only a reset. Add detergent by hand, reset for 5 minutes, and book a visit if it returns.
Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.
F3E5 returns after the manual add and reset.
Your Maytag to-do list, saved here on this device

The top-load page tells you to add detergent by hand.

Unplug the washer for 5 minutes, or switch off its breaker for 5 minutes, then restore power.

Keep a measured dose of HE detergent ready to pour in by hand. The page gives no amount, so follow the detergent label.

See whether F3E5 returns.

Mini Dispenser is the top-load label.
Give us the model and the checks you have run, then open your request right here.
Book a visit


A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F8E2 on a Maytag front-load washer is a dispenser system problem, and Product Help wants you to confirm the drawer or cartridge is not clogged with detergent.
Read the definitionIt is headed “F3E5 - Mini Dispenser,” with “Please add detergent manually” and the 5-minute reset.
Read the supporting manual“F3E5 Error Code” and the same reset, with no cause.
Read the supporting manualdET says the front-load detergent cartridge is not detected. It is a different code on a different tree.
Read the supporting manualThe page implies you can if you add detergent yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-11-19; PH 14606 / PH 14606 (front-load washer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 13441 / PH 13441 (top-load washer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-06-04; PH 14581 / PH 14581 (front-load washer)
The Product Help pages list no models, so the text applies to the washer type, not to a named model. Sources: Product Help PH 14606 (front-load), PH 13441 (top-load), with the front-load dET page.
Maytag does not describe it. The top-load page only labels the code Mini Dispenser and tells you to add detergent manually, so do that for the next wash.
No label appears there. The front-load page prints only the code and the 5-minute power reset, with no mention of a dispenser.
No. dET is a front-load notice that the detergent cartridge is not detected. F3E5 is a top-load label, and the two codes belong to different washer types.
Maytag does not say. The page only asks you to add detergent by hand, so run the wash that way and book a visit if F3E5 keeps returning.
Maytag codes, symptoms, parts and service
Maytag’s front-load and top-load washer pages for F3E3 (PH 14605 and PH 13440) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F3E3 returns.
A Maytag washer that leaves water in the tub usually points to the drain setup before the machine itself: a hose pushed too far into the standpipe, a standpipe under 30 inches, tape sealing the hose, or a clogged drain pump filter. Check those first; if water still stays, book a technician.
F8E2 on a Maytag front-load washer is a dispenser system problem, and Product Help wants you to confirm the drawer or cartridge is not clogged with detergent. On top-load models F8E2 is the bulk dispenser and F3E5 the mini dispenser. dET means the cartridge is not detected.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.