Inside the appliance

Washer dispenser (F8E2, F3E5, dET). In plain English.

F8E2 on a Maytag front-load washer is a dispenser system problem, and Product Help wants you to confirm the drawer or cartridge is not clogged with detergent. On top-load models F8E2 is the bulk dispenser and F3E5 the mini dispenser. dET means the cartridge is not detected.

Last reviewed

Front-load washer with the detergent drawer pulled open, showing compartments and a light blue cartridge bay, all clean
Experienced techniciansWarranty on our workmanshipOEM parts available on orderUpfront pricing, agreed before work

Where it fits.

Washer dispenser (F8E2, F3E5, dET) in the appliance

The detergent drawer or cartridge bay at the front of a front-load washer, or the dispenser area on top of a top-load washer.

This image is an example of the component type. It will not tell you which replacement is right for your model.

Owner care, within the model instructions.

Power the machine down and pull the plug ahead of any check you make yourself. Beware of pooled water and sharp bits of debris. Never handle a wet plug or electrical parts, take off a service panel or go beyond what your model’s owner guide permits.

  1. 1

    Clear detergent buildup

    Remove and clean the drawer or cartridge if detergent has clogged it.

  2. 2

    Seat the cartridge

    For dET, insert the Optimal Dispense cartridge fully and close the drawer completely.

  3. 3

    Skip the dispenser

    On top-load F3E5, the page says add detergent manually. If you use single-dose packs, the dET message can be ignored.

  4. 4

    Cycle power

    Unplug the washer for five minutes, then plug it back in.

Cleaning or replacement?

Leave internal testing to a technician.

F8E2 or F3E5 returns after cleaning and a power cycle.

Detergent does not reach the drum.

The drawer will not close or the cartridge will not seat.

Arrange a diagnostic

Sources and model boundaries.

These sources stand behind the Washer dispenser (F8E2, F3E5, dET) advice. Read the manual for your own model.

  • F8 E2 - Front Load Washer - Product Help | Maytag
  • F8E2 - Error Code - Product Help | Maytag
  • F3E5 - Error Code - Product Help | Maytag
  • dET - Front Load Washer - Product Help | Maytag

Follow the guide for your own model, and see how we research these pages.

Here to help

Good questions.
Clear answers.

Talk to our team
What does dET mean?

The detergent dispenser cartridge is not detected. If you use single-load doses, Product Help says to ignore the message.

What is F8E2 on a top-load?

The page labels it Bulk Dispenser and says the dispenser may be clogged, so remove and clean it.

Can I wash without the dispenser?

On the top-load F3E5 page, Product Help says to add detergent manually while the mini dispenser code shows.

How long do I cut power for?

Five minutes on the washer pages: unplug, wait, plug back in.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.