What it means
Maytag's range page links F1-C to the oven door latch, the door lock switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F1-C / Door and lid
Maytag's range page links F1-C to the oven door latch, the door lock switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F1-C
Maytag's range page links F1-C to the oven door latch, the door lock switch or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Turn the breaker off before you touch anything behind a panel.
F1-C will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy F1-C exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F1-C.

Once power is back, keep an eye on the oven for about a minute for F1-C.

Never force a locked door on the range. A latch that will not release is a job for a visit.
Write down the model and serial numbers and the exact F1-C wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionFor F1-C the range entry names the oven door latch, the door lock switch or the wiring. Nothing in it says which of them has failed.
Read the supporting manualTurn the oven's circuit breaker off for one minute, switch it back on, then keep an eye on the oven for a further minute to see whether F1-C comes back.
Read the supporting manualF1-A carries the same parts list as F1-C on the range page. The reset is the same, only the code differs.
Read the supporting manualEveryday cooking can go on if the door closes fully, but avoid any cleaning cycle.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13753 / PH 13753 (range)
F1-C comes from Maytag Product Help (PH 13753) for the range, read in November 2026; the F1-C entry names no models.
F1-C is printed against the oven door latch, the door lock switch or the wiring; the page does not narrow it down.
Try it first: one minute off, one minute on screen. If F1-C persists, a technician should look.
The list is the oven door latch, the door lock switch or the wiring; testing on site settles it.
Tell us the model, the display wording and when F1-C first showed up.
Maytag codes, symptoms, parts and service
F1-A on your range is tied by Maytag to the oven door latch, the door lock switch or the wiring. One reset costs nothing; if the code survives it, schedule a visit.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.