What it means
Maytag's range page links F1-9 to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Maytag oven F1-9 / Control board
Maytag's range page links F1-9 to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Also printed as F1-9
Maytag's range page links F1-9 to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F1-9 repeats after the reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Record F1-9 character by character and note the product type: range.

Leave the breaker off a whole minute before checking for F1-9 again.

Once power is back, keep an eye on the oven for about a minute for F1-9.

Note whether the display, keys and lights of the range behave normally, or whether other odd things happen near F1-9.
Note the model and the moment F1-9 showed up; both help us plan.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionF1-9 is printed against the oven control or the wiring. Maytag words it as a possible problem, not a finding.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1-9 stays away, the reset did its job.
Read the supporting manualF1-5 sits beside F1-9 on the range page and names the oven control, the user interface, the keypad or the wiring; the code names the oven control or the wiring.
Read the supporting manualA control problem can stop heating or cause odd behavior, so stay near the range while it runs. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13751 / PH 13751 (range)
Facts for F1-9 are from the range table (PH 13751) of Maytag Product Help, checked November 2026; no model list is printed.
The range page ties F1-9 to the oven control or the wiring without saying which has failed.
It sometimes does. Breaker off for a full minute, then on, then a minute of watching. If F1-9 returns, schedule a visit.
Not from the code alone: the entry lists the oven control or the wiring and stops.
The model number, what F1-9 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
The Maytag range entry for F1-5 names the oven control, the user interface, the keypad or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.