What it means
The Maytag range entry for F1-5 names the oven control, the user interface, the keypad or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven F1-5 / User interface
The Maytag range entry for F1-5 names the oven control, the user interface, the keypad or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as F1-5
The Maytag range entry for F1-5 names the oven control, the user interface, the keypad or the wiring. Reset first, then call us in if the code keeps coming back.
Turn the breaker off before you touch anything behind a panel.
F1-5 repeats after the reset.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Check that your appliance is a range and copy F1-5 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F1-5.

Give the oven a minute on screen after the reset; a returning F1-5 means schedule a visit.

Press each key on the range one at a time and note any that do nothing, beep alone or stick.
Write down the model and serial numbers and the exact F1-5 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visitA rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it.
Read the definitionA range showing F1-5 is, per Maytag, dealing with a possible problem in the oven control, the user interface, the keypad or the wiring. The page adds no diagnosis.
Read the supporting manualTake the oven off power at the breaker for a full minute. Put it back on and give it a minute of watching; if F1-5 stays away, the reset did its job.
Read the supporting manualRead the exact display: F1-9 means the oven control or the wiring on the range page, and F1-5 means the oven control, the user interface, the keypad or the wiring.
Read the supporting manualIf the display jumps or keys misfire, leave the range off until a technician has looked. Never open a panel on the range yourself.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13748 / PH 13748 (range)
Facts for F1-5 are from the range table (PH 13748) of Maytag Product Help, checked November 2026; no model list is printed.
F1-5 is printed against the oven control, the user interface, the keypad or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F1-5 is still there afterward, schedule a visit.
Not from the code alone: the entry lists the oven control, the user interface, the keypad or the wiring and stops.
Model and serial numbers plus a note of what happened when F1-5 appeared.
Maytag codes, symptoms, parts and service
Maytag's range page links F1-9 to the oven control or the wiring. It does not say which one, so run the reset below and schedule a visit if the code returns.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Maytag range pages for F1-7, F3 and F6 point at the control board of the oven, or the wiring to it. F1-8 also names the keypad and its interface. The only home step printed is a one-minute breaker reset, followed by watching the oven.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.