What it means
The Maytag range entry for F05 names the door latch assembly, the door switch or the wiring. Reset first, then call us in if the code keeps coming back.
Maytag oven F05 / Door and lid
The Maytag range entry for F05 names the door latch assembly, the door switch or the wiring. Reset first, then call us in if the code keeps coming back.
Also printed as F05
The Maytag range entry for F05 names the door latch assembly, the door switch or the wiring. Reset first, then call us in if the code keeps coming back.
Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.
F05 will not clear after one proper reset.
Your Maytag to-do list, saved here on this device

Power off at the breaker before any panel comes off; a gas smell means getting out and calling the gas utility from outside.

Check that your appliance is a range and copy F05 exactly as the display shows it.

Cut power at the breaker for a minute, restore it, then check for F05.

Give the oven a minute on screen after the reset; a returning F05 means schedule a visit.

If F05 showed after a self-clean, wait until the range is cool before you touch the door or the latch.
Write down the model and serial numbers and the exact F05 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Component reference
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects.
Read the definitionA range showing F05 is, per Maytag, dealing with a possible problem in the door latch assembly, the door switch or the wiring. The page adds no diagnosis.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether F05 returns.
Read the supporting manualRead the exact display: F04 means the electronic oven control or the wiring on the range page, and F05 means the door latch assembly, the door switch or the wiring.
Read the supporting manualA latch problem concerns the door and not the heat, so cook normally and keep cleaning cycles off.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13742 / PH 13742 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14401 / PH 14401 (wall oven)
F05 comes from Maytag Product Help (PH 13742) for the range, read in November 2026; the F05 entry names no models.
F05 is printed against the door latch assembly, the door switch or the wiring; the page does not narrow it down.
Yes, give it the whole minute. If F05 is still there afterward, schedule a visit.
Maytag names the door latch assembly, the door switch or the wiring. Which one failed is for a technician with a meter to decide.
Tell us the model, the display wording and when F05 first showed up.
Maytag codes, symptoms, parts and service
Maytag lists the electronic oven control or the wiring for F04 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
F5 on a Maytag range or wall oven names the door latch assembly, the latch switches and the wiring as suspects. Product Help gives a one-minute breaker reset and asks you to verify oven operation afterward. A steam oven F5 page lists the reset alone.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.