Maytag dishwasher F6E4 / Water and drain

Maytag dishwasher
error code F6E4

Dishwasher / display reference

Maytag Product Help prints F6E4 as “Potential Cause: Water Float Switch,” and its first question is whether the dishwasher is level. An unlevel dishwasher can trip the overfill or floater switch. Level it, then cycle power.

Also printed as F6E4

Last reviewed

Dishwasher / display reference
Meaning
Maytag Product Help prints F6E4 as “Potential Cause: Water Float Switch,” and its first question is whether the dishwasher is level. An unlevel dishwasher can trip the overfill or floater switch. Level it, then cycle power.
Who handles it
Reset, then book
Related codes
Source
F6E4- Dishwasher - Product Help | Maytag

What Maytag dishwasher F6E4 means.

What it means

Maytag Product Help prints F6E4 as “Potential Cause: Water Float Switch,” and its first question is whether the dishwasher is level. An unlevel dishwasher can trip the overfill or floater switch. Level it, then cycle power.

What you can safely check

Close the water valve and the breaker before any panel comes off.

When to call a technician

F6E4 returns after leveling and a power cycle.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 5 checks done
  1. Maytag dishwasher F6E4: Dishwasher lower kick plate removed showing the fill valve with two wire connectors and a braided hose, and an under-sink shut-off valve.
    Illustration. Follow your model’s instructions.
    Before you begin

    Level the dishwasher

    The page says incorrect leveling can actuate the overfill or floater switch and cause the error. Check level front to back and side to side.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Use the phone leveling help

    The page links a way to level household appliances with your phone. Any bubble level on the tub edge also works.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle

    Unplug the dishwasher for 30 seconds, or turn its breaker off for 30 seconds if it is hard wired, then restore power.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Look for water in the base

    Do not lift the dishwasher yourself. Standing water in the drip tray is the separate F8E4 code.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Restart and watch

    Run one cycle to see whether F6E4 returns.

Does F6E4 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

Parts behind the message.

Cream plastic drip tray pulled out from under a stainless dishwasher, holding a small round float with a wire lead

Component reference

Dishwasher float switch and drip tray (F8E4, F6E4)

F8E4 on a Maytag dishwasher means water was detected in the drip tray.

Read the definition

A little more context.

What does the F6E4 page ask first?

“Is the dishwasher level?” It explains that incorrect leveling can actuate the overfill or floater switch and cause the error. The troubleshooting line reads “Level Dishwasher, Cycle Power.”

Read the supporting manual

What part is named?

The water float switch, which is the same overfill and floater switch the leveling paragraph describes.

Read the supporting manual

How does F6E4 differ from F6E3 and F8E4?

F6E3 is excessive suds. F8E4 is water detected in the drip tray, with checks for connections and the float switch. F6E4 is the one solved by leveling.

Read the supporting manual

What does the manual say about the float?

The retailer-copy instructions tell you to check that the float is free from obstructions when the dishwasher will not fill.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6E4- Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12629 / PH 12629 (dishwasher)

Manufacturer document

F6E3- Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12628 / PH 12628 (dishwasher)

Manufacturer document

F8E4 - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12632 / PH 12632 (dishwasher)

Manufacturer document

Dishwasher User Instructions (W10401489A, 1/12)

Maytag / Whirlpool Corporation (retailer copy of the Use & Care Guide, pdf.lowes.com)

W10401489A (1/12); printed page numbers; retailer copy / printed p11, “Blinking lights” row

Maytag's Product Help names no model range for this code. The retailer copy of the Maytag dishwasher instructions (W10401489A) prints no F-E codes; its troubleshooting table is cited only where noted. Source: Product Help PH 12629, with the F6E3 and F8E4 pages.

Here to help

Good questions.
Clear answers.

Talk to our team
Can leveling really clear F6E4?

Maytag says incorrect leveling can actuate the float switch, so leveling is the first fix.

Does F6E4 mean a leak?

Not by this page. F8E4 is the code for water in the drip tray.

What if it is level and F6E4 returns?

Power cycle once more and book a visit.

Do I need tools to level?

If you cannot reach the leveling feet, tell us when you book.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.