Maytag dishwasher F6E3 / Water and drain

Maytag dishwasher
error code F6E3

Dishwasher / display reference

On a dishwasher, the entry for F6E3 says “Potential Cause: Excessive Suds.” Nothing else is printed, so schedule a visit if it repeats.

Also printed as F6E3

Last reviewed

Dishwasher / display reference
Meaning
On a dishwasher, the entry for F6E3 says “Potential Cause: Excessive Suds.” Nothing else is printed, so schedule a visit if it repeats.
Who handles it
Technician visit
Related codes
Source
F6E3- Dishwasher - Product Help | Maytag

What Maytag dishwasher F6E3 means.

What it means

On a dishwasher, the entry for F6E3 says “Potential Cause: Excessive Suds.” Nothing else is printed, so schedule a visit if it repeats.

What you can safely check

Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.

When to call a technician

F6E3 will not clear after one proper reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag dishwasher F6E3: Dishwasher lower kick plate removed showing the fill valve with two wire connectors and a braided hose, and an under-sink shut-off valve.
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Switch off power and the water supply before opening anything, and wipe up spills so nobody slips.

  2. Dishwashers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Match the label on your appliance to the dishwasher list before you rely on the wording for F6E3.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Maytag prints no reset for F6E3, so record what the dishwasher does rather than guessing a fix.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Write down the model and serial numbers and the exact F6E3 wording before you call.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look in the tub for standing water, and check the filter and spray arm for blockage.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Keep the model number close and note when F6E3 appeared and what the dishwasher was doing.

Does F6E3 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Where a leak is caught.

Conceptual dishwasher sectionTub seam / gasketBase panFloat switchInlet valve1234
  1. 1Tub seam / gasket
  2. 2Base pan

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside F6E3 for a dishwasher?

The dishwasher entry for F6E3 reads “Potential Cause: Excessive Suds.” That is the whole explanation Maytag prints.

Read the supporting manual

What is worth doing before I schedule a visit for F6E3?

No reset is printed for F6E3 on the dishwasher page. Writing down what the dishwasher does around the code is the useful thing to do.

Read the supporting manual

Is F6E3 the same as F4E3 on a dishwasher?

F4E3 is a separate entry from F6E3 on the dishwasher page, with its own wording.

Read the supporting manual

How careful should I be with the dishwasher while F6E3 is up?

If the tub fills or leaks, shut off the water supply and call us. Never open a panel on the dishwasher yourself.

Read the supporting manual

The manual behind the message.

Manufacturer document

F6E3- Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12628 / PH 12628 (dishwasher)

F6E3 comes from Maytag Product Help (PH 12628) for the dishwasher, read in November 2026; the F6E3 entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What is F6E3 on a Maytag dishwasher?

The dishwasher page reads “Potential Cause: Excessive Suds.” It prints nothing more about cause.

Does Maytag give a reset for F6E3?

The page prints none. Write down what you see and schedule a visit if F6E3 keeps appearing.

Does Maytag tell me what to replace for F6E3?

Not by itself; the page stops at the line it prints.

What should I have ready when I schedule for F6E3?

The model and serial numbers, the exact display for F6E3, and what the dishwasher was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.