Maytag washer No Water Detected / Water and drain

Maytag washer
error code No Water Detected

Washer / display referenceNo Water Detected

On a front-load washer, the entry for No Water Detected says “The F8 E1, Lo FL, or 'No Water Detected' error code means your washer is not detecting the correct amount of...” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as No Water Detected

Last reviewed

Washer / display referenceNo Water Detected
Meaning
On a front-load washer, the entry for No Water Detected says “The F8 E1, Lo FL, or 'No Water Detected' error code means your washer is not detecting the correct amount of...” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Owner checks first, then a technician
Related codes
Source
No Water Detected - Message - Product Help | Maytag

What Maytag washer No Water Detected means.

What it means

On a front-load washer, the entry for No Water Detected says “The F8 E1, Lo FL, or 'No Water Detected' error code means your washer is not detecting the correct amount of...” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

When to call a technician

No Water Detected repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer No Water Detected: Back of a washer with two braided inlet hoses laid on top, their screens visible, plus a drain hose in a standpipe and two shut-off valves on the wall
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Record No Water Detected character by character and note the product type: front-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Cut the power

    Maytag prints no reset for No Water Detected, so record what the washer does rather than guessing a fix.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Keep the model number close and note when No Water Detected appeared and what the front-load washer was doing.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Look at the inlet hoses: hot and cold must be on the right connections.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Note the model and the moment No Water Detected showed up; both help us plan.

Does No Water Detected keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

Fill and the water level.

Conceptual Washer sectionInlet valveTubLevel sensorDrain pump1234
  1. 2Tub

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does the Maytag front-load washer page explain No Water Detected?

Here is what Maytag prints for No Water Detected on a front-load washer: “The F8 E1, Lo FL, or 'No Water Detected' error code means your washer is not detecting the correct amount of incoming water.”

Read the supporting manual

What goes first when the front-load washer flashes No Water Detected?

No reset is printed for No Water Detected on the front-load washer page. Writing down what the washer does around the code is the useful thing to do.

Read the supporting manual

Is No Water Detected the same as Lo FL on a front-load washer?

Lo FL is a neighbor of No Water Detected, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

Can the front-load washer keep running while No Water Detected is showing?

Only restart the front-load washer once the taps are open and the floor is dry.

Read the supporting manual

The manual behind the message.

Manufacturer document

No Water Detected - Message - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-04; PH 14638 / PH 14638 (front-load washer)

Scope for No Water Detected: Maytag front-load washer, PH 14638, checked November 2026. Maytag lists no models on the No Water Detected page.

Here to help

Good questions.
Clear answers.

Talk to our team
How should I read No Water Detected on my front-load washer?

On a front-load washer showing No Water Detected, Maytag's wording is “The F8 E1, Lo FL, or 'No Water Detected' error code means your washer is not detecting the correct amount of incoming water.” That is the whole entry.

Can I clear No Water Detected myself?

There is no reset on that page. Note what happens and book us if No Water Detected persists.

Does Maytag tell me what to replace for No Water Detected?

Not by itself; the page stops at the line it prints.

What helps most on the first visit for No Water Detected?

Model and serial numbers plus a note of what happened when No Water Detected appeared.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.