What it means
Maytag’s front-load and top-load washer pages for F6E1 (PH 14614 and PH 13446) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F6E1 returns.
Maytag washer F6E1 / Reset only
Maytag’s front-load and top-load washer pages for F6E1 (PH 14614 and PH 13446) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F6E1 returns.
Also printed as F6E1
Maytag’s front-load and top-load washer pages for F6E1 (PH 14614 and PH 13446) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F6E1 returns.
Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.
F6E1 returns, or the front-load washer behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

Check that your appliance is a front-load washer and copy F6E1 exactly as the display shows it.

Power off for five full minutes, then on, and look for F6E1.

Run the washer briefly after the reset and see whether F6E1 comes back.

Note whether the display, keys and lights of the front-load washer behave normally, or whether other odd things happen near F6E1.
Note the model and the moment F6E1 showed up; both help us plan.
The dryer and dishwasher pages tie this code to the control and the panel. The washer pages print no cause, so only the reset applies.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Nothing. The front-load and top-load washer pages (PH 14614 and PH 13446, modified November 2025 and May 2025) gives no cause, no part and no meaning for F6E1; it has only a power reset.
Read the supporting manualUnplug the washer for 5 minutes and plug it back in, or switch its breaker off for 5 minutes and back on. Maytag compares it to restarting a computer.
Read the supporting manualMaytag says resetting the control can sometimes solve the issues you are experiencing, but it does not promise it. After the 5 minutes, watch the display for F6E1; if it is gone, run a short cycle and keep an eye on the washer.
Read the supporting manualGive us the model and serial numbers, the exact display, and what the washer was doing when F6E1 appeared. Say whether the reset cleared it, even for a short time, because a code that returns is the reason to book a visit.
Read the supporting manualYes. The dishwasher page lists “User Interface Error, Main Control.” The dryer page is headed Communication Error and names the main control board, the user interface (touchpad) or the wiring.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-11-19; PH 14614 / PH 14614 (front-load washer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2025-05-27; PH 13446 / PH 13446 (top-load washer)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-06-15; PH 12627 / PH 12627 (dishwasher)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2026-08-19; PH 12815 / PH 12815 (dryer)
Facts for F6E1 come from Maytag Product Help, front-load and top-load washer pages (PH 14614 and PH 13446), read in November 2026. The pages list no models.
No. The front-load and top-load washer pages prints only the reset instruction and no cause, so we cannot name a failed part and will not guess one.
Five minutes, as printed. Unplug the washer or switch off its breaker for the full 5 minutes before restoring power, because a shorter wait may not reset the control.
No. Both pages print the same reset and no cause, so you can follow the same steps on either type of washer.
Book a visit if F6E1 returns after the 5-minute reset, or if the washer behaves oddly in other ways. Have the model and serial numbers ready.
Maytag does not say so for the washer. The dryer and dishwasher pages point to the control and the panel, but the washer pages print only a power reset and no cause.
Maytag codes, symptoms, parts and service
Maytag's front-load washer page words F5E4 like this: “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” Try the five-minute power-off reset, and schedule a visit if the code returns.
A Maytag washer that leaves water in the tub usually points to the drain setup before the machine itself: a hose pushed too far into the standpipe, a standpipe under 30 inches, tape sealing the hose, or a clogged drain pump filter. Check those first; if water still stays, book a technician.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.