Maytag washer F5E4 / Door and lid

Maytag washer
error code F5E4

Washer / display reference

Maytag's front-load washer page words F5E4 like this: “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” Try the five-minute power-off reset, and schedule a visit if the code returns.

Also printed as F5E4

Last reviewed

Washer / display reference
Meaning
Maytag's front-load washer page words F5E4 like this: “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” Try the five-minute power-off reset, and schedule a visit if the code returns.
Who handles it
Reset, then book
Related codes
Source
F5 E4 - Front Load Washer - Product Help | Maytag

What Maytag washer F5E4 means.

What it means

Maytag's front-load washer page words F5E4 like this: “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” Try the five-minute power-off reset, and schedule a visit if the code returns.

What you can safely check

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

When to call a technician

F5E4 returns, or the front-load washer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer F5E4: Open front-load washer door close up, with the metal latch hook on the door and the black lock housing on the frame
    Illustration. Follow your model’s instructions.
    Before you begin

    Stay safe

    Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Read the display

    Match the label on your appliance to the front-load washer list before you rely on the wording for F5E4.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Power-cycle it

    Wait five minutes without power before you check for F5E4 again.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Watch afterward

    Once power is back, keep an eye on the washer for about a minute for F5E4.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Do not force a locked door or lid; wait for the front-load washer to finish and release.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Note the model

    Write down the model and serial numbers and the exact F5E4 wording before you call.

Does F5E4 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The door and its lock.

Conceptual Washer sectionDoor / lidDoor lockControl123
  1. 1Door / lid
  2. 3Control

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

How does the Maytag front-load washer page explain F5E4?

The front-load washer entry for F5E4 reads “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” That is the whole explanation Maytag prints.

Read the supporting manual

How do I handle F5E4 on the front-load washer step by step?

Leave the washer off power for five full minutes, switch it back on, and check the display for F5E4.

Read the supporting manual

Why do F5E4 and F5E3 sit side by side in Maytag's list?

The front-load washer list prints F5E3 next to F5E4, but with a different line. Look up the one on your display.

Read the supporting manual

Should the family keep using the front-load washer with F5E4 showing?

If the door will not open, leave the front-load washer off and book us rather than prying. If F5E4 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F5 E4 - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-11-19; PH 14613 / PH 14613 (front-load washer)

Manufacturer document

F5E4 - Error Code - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 13445 / PH 13445 (top-load washer)

Facts for F5E4 are from the front-load washer table (PH 14613) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does Maytag say F5E4 means?

The front-load washer page reads “The F5 E4 error code indicates that the washer has run for three consecutive cycles without opening the door.” It prints nothing more about cause.

Can a power-off reset fix F5E4?

Wait the whole five minutes, not less. If F5E4 persists, a technician should look.

Is a specific part blamed for F5E4?

No part is named for F5E4; the page gives only the wording above.

What should I tell the technician about F5E4?

Tell us the model, the display wording and when F5E4 first showed up.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.