Maytag washer F2E3 / User interface

Maytag washer
error code F2E3

Washer / display reference

For a top-load washer showing F2E3, Maytag prints “The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated...” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

Also printed as F2E3

Last reviewed

Washer / display reference
Meaning
For a top-load washer showing F2E3, Maytag prints “The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated...” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.
Who handles it
Reset, then book
Related codes
Source
F2E3 - Error Code - Product Help | Maytag

What Maytag washer F2E3 means.

What it means

For a top-load washer showing F2E3, Maytag prints “The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated...” Cut the power for five minutes, then restore it; schedule a visit if the code is still there.

What you can safely check

Power and water off before any panel comes off; towels down for spills.

When to call a technician

F2E3 returns, or the top-load washer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer F2E3: Hand pressing a lit cycle option button on a washer console with a knob and a display reading 45
    Illustration. Follow your model’s instructions.
    Before you begin

    Before you start

    Power and water off before any panel comes off; towels down for spills.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Check that your appliance is a top-load washer and copy F2E3 exactly as the display shows it.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Run the reset

    Power off for five full minutes, then on, and look for F2E3.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Give the washer a minute on screen after the reset; a returning F2E3 means schedule a visit.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Press each key on the top-load washer one at a time and note any that do nothing, beep alone or stick.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Write down the model and serial numbers and the exact F2E3 wording before you call.

Does F2E3 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What should a top-load washer owner take from F2E3?

Here is what Maytag prints for F2E3 on a top-load washer: “The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated wiring.”

Read the supporting manual

What is worth doing before I schedule a visit for F2E3?

Maytag asks for five minutes without power. Wait the full time, restore power, and note whether F2E3 reappears.

Read the supporting manual

Why do F2E3 and F0E9 sit side by side in Maytag's list?

F0E9 is a separate entry from F2E3 on the top-load washer page, with its own wording.

Read the supporting manual

Can the top-load washer keep running while F2E3 is showing?

The top-load washer is fine to use only if you can start and stop it with certainty. If F2E3 keeps returning, stop and schedule a visit.

Read the supporting manual

The manual behind the message.

Manufacturer document

F2E3 - Error Code - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 13435 / PH 13435 (top-load washer)

Facts for F2E3 are from the top-load washer table (PH 13435) of Maytag Product Help, checked November 2026; no model list is printed.

Here to help

Good questions.
Clear answers.

Talk to our team
What does F2E3 mean for a top-load washer?

Maytag's wording is “The F2 E3 alert indicates there may be an issue with the appliance control unit, user interface or associated wiring.” That is the whole entry.

Will five minutes without power clear F2E3?

Try it first; five minutes is the printed time. A returning F2E3 means schedule us.

Does the top-load washer page name a part for F2E3?

No part is named for F2E3; the page gives only the wording above.

What should I have ready when I schedule for F2E3?

The model and serial numbers, the exact display for F2E3, and what the top-load washer was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.