Maytag washer F1E1 / Reset only

Maytag washer
error code F1E1

Washer / display reference

Maytag’s front-load and top-load washer pages for F1E1 (PH 14596 and PH 13431) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F1E1 returns.

Also printed as F1E1

Last reviewed

Washer / display reference
Meaning
Maytag’s front-load and top-load washer pages for F1E1 (PH 14596 and PH 13431) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F1E1 returns.
Who handles it
Reset, then book
Related codes
Source
F1 E1 - Front Load Washer - Product Help | Maytag

What Maytag washer F1E1 means.

What it means

Maytag’s front-load and top-load washer pages for F1E1 (PH 14596 and PH 13431) print no meaning for the code, only a reset: cut power to the washer for five minutes, then restore it. Book a visit if F1E1 returns.

What you can safely check

Power and water off before any panel comes off; towels down for spills.

When to call a technician

F1E1 returns, or the front-load washer behaves oddly around the code.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 7 checks done
  1. Maytag washer F1E1: Hand pressing a round button on a top-load washer panel next to a dial and a lit display, with a detergent jug on the shelf above
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Power and water off before any panel comes off; towels down for spills.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Check what you see

    Record F1E1 character by character and note the product type: front-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the power

    Power off for five full minutes, then on, and look for F1E1.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    Retest briefly

    Once power is back, keep an eye on the washer for about a minute for F1E1.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    The control board lives behind panels on the front-load washer; keep them closed.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Have this ready

    Keep the model number close and note when F1E1 appeared and what the front-load washer was doing.

  7. Illustration. Follow your model’s instructions.
    Check 7

    Ignore other appliances’ meanings

    The same code means a control module on a dishwasher and a keypad link on a cooktop. For the washer, only the power reset is printed.

Does F1E1 keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag say F1E1 means?

Nothing. The front-load and top-load washer pages (PH 14596 and PH 13431, modified November 2025 and May 2025) gives no cause, no part and no meaning for F1E1; it has only a power reset.

Read the supporting manual

How do I reset the washer for F1E1?

Unplug the washer for 5 minutes and plug it back in, or switch its breaker off for 5 minutes and back on. Maytag compares it to restarting a computer.

Read the supporting manual

Will the reset fix F1E1?

Maytag says resetting the control can sometimes solve the issues you are experiencing, but it does not promise it. After the 5 minutes, watch the display for F1E1; if it is gone, run a short cycle and keep an eye on the washer.

Read the supporting manual

What should I tell the technician about F1E1?

Give us the model and serial numbers, the exact display, and what the washer was doing when F1E1 appeared. Say whether the reset cleared it, even for a short time, because a code that returns is the reason to book a visit.

Read the supporting manual

Does F1E1 mean something on other Maytag appliances?

Yes, and each appliance words it differently. The dishwasher page lists “Potential Cause: Control Module.” The electric cooktop page describes a loss of communication between the keypad and the appliance manager.

Read the supporting manual

The manual behind the message.

Manufacturer document

F1 E1 - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-11-19; PH 14596 / PH 14596 (front-load washer)

Manufacturer document

F1E1- Error Code - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-05-27; PH 13431 / PH 13431 (top-load washer)

Manufacturer document

F1E1 - Dishwasher - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2026-06-15; PH 12623 / PH 12623 (dishwasher)

Manufacturer document

F1E1 - Electric Cooktop - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2024-01-22; PH 11975 / PH 11975 (electric cooktop)

Manufacturer document

F1E1 - Error Code - Over-the-Range Microwave - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2021-04-29; PH 10349 / PH 10349 (over-the-range microwave)

Facts for F1E1 come from Maytag Product Help, front-load and top-load washer pages (PH 14596 and PH 13431), read in November 2026. The pages list no models.

Here to help

Good questions.
Clear answers.

Talk to our team
Does Maytag say what F1E1 means on a washer?

No. The front-load and top-load washer pages prints only the reset instruction and no cause, so we cannot name a failed part and will not guess one.

How long should the washer stay without power for F1E1?

Five minutes, as printed. Unplug the washer or switch off its breaker for the full 5 minutes before restoring power, because a shorter wait may not reset the control.

Do the front-load and top-load pages differ for F1E1?

No. Both pages print the same reset and no cause, so you can follow the same steps on either type of washer.

When should I book a visit for F1E1?

Book a visit if F1E1 returns after the 5-minute reset, or if the washer behaves oddly in other ways. Have the model and serial numbers ready.

Can I use the dishwasher or cooktop meaning of F1E1 for my washer?

No. Those pages describe other appliances, and Maytag prints no cause on the washer page. Treating a dishwasher control module as the washer’s cause would be a guess.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.