Maytag washer 1h, 2h, 3h....up to 12h / Information

Maytag washer
error code 1h, 2h, 3h....up to 12h

Washer / display reference1h, 2h, 3h....up to 12h

On a front-load washer, the entry for 1h, 2h, 3h....up to 12h says “When the display shows a number up to 12, followed by an 'h,' the Delay Wash has been activated.” No reset is printed for it, so schedule a visit if it keeps appearing.

Also printed as 1h, 2h, 3h....up to 12h

Last reviewed

Washer / display reference1h, 2h, 3h....up to 12h
Meaning
On a front-load washer, the entry for 1h, 2h, 3h....up to 12h says “When the display shows a number up to 12, followed by an 'h,' the Delay Wash has been activated.” No reset is printed for it, so schedule a visit if it keeps appearing.
Who handles it
Information only
Related codes
Source
1h, 2h, 3h....up to 12h - Front Load Washer - Product Help | Maytag

What Maytag washer 1h, 2h, 3h....up to 12h means.

What it means

On a front-load washer, the entry for 1h, 2h, 3h....up to 12h says “When the display shows a number up to 12, followed by an 'h,' the Delay Wash has been activated.” No reset is printed for it, so schedule a visit if it keeps appearing.

What you can safely check

Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

When to call a technician

1h, 2h, 3h....up to 12h repeats after the reset.

Your Maytag to-do list, saved here on this device

Safe checks, in order.

0 of 6 checks done
  1. Maytag washer 1h, 2h, 3h....up to 12h: Top-load washer control panel with a dial knob and a lit display, a wicker basket of towels beside it
    Illustration. Follow your model’s instructions.
    Before you begin

    Safety first

    Unplug the machine or switch off its breaker before opening any panel, close the water taps, and keep floors dry so nobody slips.

  2. Washers in a thoughtfully designed home
    Illustration. Follow your model’s instructions.
    Check 2

    Record the code

    Record 1h, 2h, 3h....up to 12h character by character and note the product type: front-load washer.

  3. Close view of a washer control dial and cycle buttons
    Illustration. Follow your model’s instructions.
    Check 3

    Reset the power

    No reset is printed here; note the behavior of the washer around 1h, 2h, 3h....up to 12h instead.

  4. Over-the-shoulder view of a technician in a navy shirt holding a tablet with five empty checkboxes, a top-load washer behind
    Illustration. Follow your model’s instructions.
    Check 4

    See if it returns

    Note the model and the moment 1h, 2h, 3h....up to 12h showed up; both help us plan.

  5. A technician testing a dryer heating circuit
    Illustration. Follow your model’s instructions.
    Check 5

    Appliance-specific check

    Write down the exact words or symbols the front-load washer shows before you do anything.

  6. Illustration. Follow your model’s instructions.
    Check 6

    Gather details

    Keep the model number close and note when 1h, 2h, 3h....up to 12h appeared and what the front-load washer was doing.

Does 1h, 2h, 3h....up to 12h keep coming back?

Give us the model and the checks you have run, then open your request right here.

Book a visit

The control and its sensors.

Conceptual Washer sectionControl panelControl boardLevel sensorMotor wiring1234
  1. 1Control panel
  2. 2Control board
  3. 4Motor wiring

A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.

A little more context.

What does Maytag print beside 1h, 2h, 3h....up to 12h for a front-load washer?

1h, 2h, 3h....up to 12h is covered by this wording on the front-load washer page: “When the display shows a number up to 12, followed by an 'h,' the Delay Wash has been activated.”

Read the supporting manual

What goes first when the front-load washer flashes 1h, 2h, 3h....up to 12h?

No reset is printed for 1h, 2h, 3h....up to 12h on the front-load washer page. Writing down what the washer does around the code is the useful thing to do.

Read the supporting manual

What separates 1h, 2h, 3h....up to 12h from FH?

FH is a neighbor of 1h, 2h, 3h....up to 12h, not a synonym. The reset may overlap; the text does not.

Read the supporting manual

How careful should I be with the front-load washer while 1h, 2h, 3h....up to 12h is up?

When in doubt, switch the front-load washer off.

Read the supporting manual

The manual behind the message.

Manufacturer document

1h, 2h, 3h....up to 12h - Front Load Washer - Product Help | Maytag

Maytag Product Help (producthelp.maytag.com)

dateModified 2025-06-04; PH 14578 / PH 14578 (front-load washer)

1h, 2h, 3h....up to 12h comes from Maytag Product Help (PH 14578) for the front-load washer, read in November 2026; the 1h, 2h, 3h....up to 12h entry names no models.

Here to help

Good questions.
Clear answers.

Talk to our team
What does 1h, 2h, 3h....up to 12h mean for a front-load washer?

The front-load washer page reads “When the display shows a number up to 12, followed by an 'h,' the Delay Wash has been activated.” It prints nothing more about cause.

Can I clear 1h, 2h, 3h....up to 12h myself?

The page prints none. Write down what you see and schedule a visit if 1h, 2h, 3h....up to 12h keeps appearing.

Does Maytag tell me what to replace for 1h, 2h, 3h....up to 12h?

No part is named for 1h, 2h, 3h....up to 12h; the page gives only the wording above.

What do you need to know about 1h, 2h, 3h....up to 12h?

The model and serial numbers, the exact display for 1h, 2h, 3h....up to 12h, and what the front-load washer was doing at the time.

Let’s take care of it.

A full hamper waits for no one.
Book the repair.