What it means
Maytag lists the wi-fi antenna or the wiring for FCE5 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Maytag oven FCE5 / Wi-Fi and registration
Maytag lists the wi-fi antenna or the wiring for FCE5 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Also printed as FCE5
Maytag lists the wi-fi antenna or the wiring for FCE5 on the range. Reset the power first and watch the display; a returning the code is the cue to book us.
Turn the breaker off before you touch anything behind a panel.
FCE5 returns, or the range behaves oddly around the code.
Your Maytag to-do list, saved here on this device

Turn the breaker off before you touch anything behind a panel. If you smell gas, leave the house and call your gas utility from outside.

Record FCE5 character by character and note the product type: range.

Breaker off for one full minute, then back on, and look for FCE5.

Give the oven a minute on screen after the reset; a returning FCE5 means schedule a visit.

Restart the router as the page suggests, then restart the range and try the connection again.
Write down the model and serial numbers and the exact FCE5 wording before you call.
Give us the model and the checks you have run, then open your request right here.
Book a visit
A rough sketch only, because a Maytag is laid out differently from model to model. Click a highlighted part to open its photo and the matching test.
Maytag's range page says FCE5 may come from the wi-fi antenna or the wiring. It stops there; no test and no ranking is given.
Read the supporting manualMaytag's reset is a minute at the breaker: off, wait, on. Then leave the oven in view for another minute and note whether FCE5 returns.
Read the supporting manualMaytag gives FCE4 and FCE5 the same wording on the range page, so the same first step fits both.
Read the supporting manualFCE5 is about the connection and not the heating. If the code keeps returning, stop and schedule a visit.
Read the supporting manualManufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-08-16; PH 13806 / PH 13806 (range)
Manufacturer document
Maytag Product Help (producthelp.maytag.com)
dateModified 2024-11-08; PH 14336 / PH 14336 (wall oven)
Scope for FCE5: Maytag range, PH 13806, checked November 2026. Maytag lists no models on the FCE5 page.
Maytag lists the wi-fi antenna or the wiring. It is a possible-cause list, not a confirmed failure.
Yes, give it the whole minute. If FCE5 is still there afterward, schedule a visit.
No. the wi-fi antenna or the wiring are all candidates and the page gives no way to choose.
The model number, what FCE5 looked like, and whether the reset changed anything.
Maytag codes, symptoms, parts and service
The Maytag range entry for FCE4 names the wi-fi antenna or the wiring. Reset first, then call us in if the code keeps coming back.
A Maytag steam wall oven asks you to "Empty and Refill Water Container" before each steam cycle, "Descale is needed" when it needs cleaning, and "Please remove and empty container" at the end of a descale. Treat each as a request rather than a breakdown, carry it out, and book a visit if one keeps returning.
Book a diagnostic for your model, done at the machine.
Office details, and the entry information to pass along.